Call Us: 800 - 729 - 9767

Sea Sure Rudder Fittings

Sea Sure Rudder Fittings

Rudder fittings. Extruded, precision-machined from heat treated black anodized aluminum. Fitted with 5/16 inch cross-pins for added rigidity, stainless steel pintle pins. Lightweight, with six times the rigidity of stainless steel hardware. Widely spaced counter bored holes accept round head bolts. Gudgeons are available with carbon bushings for less friction - bushing part numbers are designated with a B.

Part No. Use/Type # Holes/side Inside Width Inside Length Pin/Hole Diameter
in mm in mm in mm
SS1800 Top Gudgeon 2 1 25 2-1/4 57 5/16 8
SS1800B Top Gudgeon 2 1 25 2-1/4 57 5/16 8
SS1801 Top Pintle 2 1 25 2-1/4 57 5/16 x 1-1/4 8 x 32
SS1802 Bottom Gudgeon 3 1 25 4 102 5/16 8
SS1802B Bottom Gudgeon 3 1 25 4 102 5/16 8
SS1803 Bottom Pintle 3 1 25 4 102 5/16 x 1-3/4 8 x 45
SS1804 Top Gudgeon 2 1-1/2 38 2-1/2 64 5/16 8
SS1804B Top Gudgeon 2 1-1/2 38 2-1/2 64 5/16 8
SS1805 Top Pintle 2 1-1/2 38 2-1/2 64 5/16 x 1-1/4 8 x 32
SS1806 Bottom Gudgeon 3 1-1/2 38 4 102 5/16 8
SS1806B Bottom Gudgeon 3 1-1/2 38 4 102 5/16 8
SS1807 Bottom Pintle 3 1-1/2 38 4 102 5/16 x 1-3/4 8 x 45
SS1808 Top Gudgeon 2 2-1/4 57 2-1/2 64 5/16 8
SS1808B Top Gudgeon 2 2-1/4 57 2-1/2 64 5/16 8
SS1809 Top Pintle 2 2-1/4 57 2-1/2 64 5/16 x 1-1/4 8 x 32
SS1810 Bottom Gudgeon 3 2-1/4 57 4 102 5/16 8
SS1810B Bottom Gudgeon 3 2-1/4 57 4 102 5/16 8
SS1811 Bottom Pintle 3 2-1/4 57 4 102 5/16 x 1-1/2 8 x 38
SS1843 Top Gudgeon 2 1-1/4 32 2-1/4 57 5/16 8
SS1843B Top Gudgeon 2 1-1/4 32 2-1/4 57 5/16 8
SS1844 Top Pintle 2 1-1/4 32 2-1/4 57 5/16 x 1-1/4 8 x 32
SS1845 Bottom Gudgeon 3 1-1/4 32 4 102 5/16 8
SS1845B Bottom Gudgeon 3 1-1/4 32 4 102 5/16 8
SS1846 Bottom Pintle 3 1-1/4 32 4 102 5/16 x 1-3/4 8 x 45


SS1800 Top Rudder Gudgeon 1x2.25 Price: $27.92 SS1800B Top Rudder Gudg w/Bush 1x2.25 Price: $46.16
SS1801 Top Rudder Pintle 1x2.25 Price: $47.08 SS1802 Bottom Rudder Gudg 1x4 Price: $31.76
SS1802B Bottom Rudder Gudg w/Bush 1x4 Price: $40.44 SS1803 Bottom Rudder Pintle 1x4 Price: $55.80
SS1804 Top Rudder Gudgeon 1.5x2.5 Price: $31.76 SS1804B Top Rudder Gudg w/Bush 1.5x2.5 Price: $51.00
SS1805 Top Rudder Pintle 1.5x2.5 Price: $52.88 SS1806 Bottom Rudder Gudg 1.5x4 Price: $55.80
SS1806B Bottom Rudder Gudg w/Bu 1.5x4 Price: $52.88 SS1807 Bottom Rudder Pintle 1.5x4 Price: $67.32
SS1808 Top Rudder Gudg 2-1/4x2.5 Price: $31.76 SS1808B Top Rudder Gudg w/Bu 2-1/4x2.5 Price: $47.97
SS1809 Top Rudder Pintle 2-1/4 x 2.5 Price: $48.08 SS1810 Bottom Rudder Gudg 2-1/4x4 Price: $33.64
SS1810B Bottom Rudder Gudg w/bu2-1/4x4 Price: $50.88 SS1811 Bottom Rudder Pintle 2-1/4x4 Price: $67.32
SS1843 Top Rudder Gudg 1-1/4x 2-1/4 Price: $36.60 SS1843B Top Rud Gudg w/Bu 1-1/4x2-1/4 Price: $48.08
SS1844 Top Rudder Pintle 1-1/4x2-1/4 Price: $55.80 SS1845 Bottom Rudd Gudg 1-1/4x4 Price: $37.52
SS1845B Bottom Rud Gudg w/Bu 1-1/4x4 Price: $51.00 SS1846 Bottom Rudder Pintle 1-1/4x4 Price: $62.52



Sea Sure Rudder Fitting Packing Plates

Sea Sure Rudder Fitting Packing Plates Used to ensure a tight fit between blade and gudgeon or pintle. Use these plates with the Sea Sure rudder fittings above. There are two hole versions and three hole versions, two hole versions are for top fittings and three hole versions are for bottom fittings. Both options are available in 1/16 inch, 1/8 inch, 3/16 inch, and 1/4 inch thickness.

SS1830 Packing Piece 1/16 3-Hole Price: $3.88 SS1831 Packing Piece 1/8 3-Hole Price: $4.16
SS1832 Packing Piece 3/16 3-Hole Price: $4.24 SS1833 Packing Piece 1/4 2-Hole Price: $4.32
SS1834 Packing Piece 1/4 3-Hole Price: $4.32 SS1835 Packing Piece 1/16 2-Hole Price: $4.32
SS1836 Packing Piece 1/8 2-Hole Price: $4.16 SS1837 Packing Piece 3/16 2-Hole Price: $4.53


Sea Sure Transom Fittings

Sea Sure Transom Fittings

Transom fittings. Extruded, precision-machined from heat treated black anodized aluminum. Fitted with 5/16 inch cross-pins for added rigidity, stainless steel pintle pins. Lightweight, with six times the rigidity of stainless steel hardware. Widely spaced counter bored holes accept round head bolts. Gudgeons are available with carbon bushings for less friction - bushing part numbers are designated with a B. SS1817 and SS1818 are machined to be lighter weight

Part No. Use/Type # Holes/side Height Width Pin/Hole Diameter
in mm in mm in mm
SS1816 Top Gudgeon 2 (5mm) 7/8 22 3 76 5/16 8
SS1816B Top Gudgeon 2 (5mm) 7/8 22 3 76 5/16 8
SS1812 Top Gudgeon 2 (6mm) 7/8 22 3 76 5/16 8
SS1812B Top Gudgeon 2 (6mm) 7/8 22 3 76 5/16 8
SS1813 Top Pintle 2 7/8 22 3 76 5/16 x 1-1/8 8 x 28
SS1815 Bottom Gudgeon 4 1-1/8 28 3 76 5/16 8
SS1815B Bottom Gudgeon 4 1-1/8 28 3 76 5/16 8
SS1814 Bottom Pintle 4 1-1/8 28 3 76 5/16 x 1-3/4 8 x 45
SS1817 Top Gudgeon LT 2 1/2 13 3 76 5/16 8
SS1818 Top Pintle LT 2 1/2 13 3 76 5/16 x 1-3/8 8 x 35


SS1812 Top Transom Gudgeon 3x7/8 Price: $21.20 SS1812B Top Transom Gudgeon w/ Bushing 3x7/8 Price: $29.84
SS1813 Top Transom Pintle 3x7/8 Price: $40.44 SS1814 Bottom Transom Pintle 3x1-1/8 Price: $41.40
SS1815 Bottom Transom Gudgeon 3x1-1/8 Price: $25.04 SS1815B Bottom Transom Gudgeon w/ Bushing 3x1-1/8 Price: $31.76
SS1816 Top Transom Gudgeon 3x7/8 Price: $21.20 SS1816B Top Transom Gudgeon w/Bu 3x7/8 Price: $36.60
SS1817 Top Transom Gudgeon LT 3x1/2 Price: $20.20 SS1818 Top Transom Pintle LT 3x1/2 Price: $35.60



Sea Sure Transom Fitting Backing Plates

Sea Sure Transom Fitting Backing Plates Use these backing plates with the Sea Sure transom fittings. SS1852 is the two hole version, used for SS1812 and the SS1813. SS1854 is the four hole version, used for SS1814 and SS1815 transom fittings. Both the two and four hole versions are 3/16 inch thick.

SS1852 Backing Plate 2-Hole Price: $5.08 SS1854 Backing Plate 4-Hole Price: $5.36


Ronstan Rudder Hardware

Ronstan Rudder Hardware

Pintle pins are cross-drilled to accept the RF413 Retaining Clip. The RFPNP55 Retaining Clip provides simple rudder retention security. Alloy gudgeons have insert molded Nylon bushes to provide a firm fit with pintles and avoid corrosion and fatigue. 9.5mm (3/8") transom fittings have alloy bases for greather strength. All are great for off-the-beach dinghies and catamarans.

Part # Description Pin/Hole Dia. Internal Width Strap Length Weight
mm in mm in mm in g oz
RF2500 Rudder gudgeon, alloy with Nylon bearing 7.9 5/16 20 25/32 79 3 1/8 42 1.5
RF2501 Rudder gugdgeon, alloy with Nylon bearing 7.9 5/16 32 1 1/4 96 3 3/4 85 3.0
RF2503 Rudder gudgeon, alloy with Nylon bearing 7.9 5/16 40 1 9/16 96 3 3/4 85 3.0
RF2510 Transom gudgeon, Nylon 7.9 5/16 - - - - 19 0.7
RF2510A Transom gudgeon, alloy 7.9 5/16 - - - - 35 1.2
RF2515 Transom pintle, Nylon with stainless steel pin 7.9 5/16 - - - - 47 1.7
RF2515A Transom pintle, alloy with stainless steel pin 7.9 5/16 - - - - 60 2.1
RF2502 Rudder gudgeon, alloy with Nylon bearing 9.5 3/8 32 1 1/4 96 3 3/4 85 3.0
RF2504 Rudder gudgeon, alloy with Nylon bearing 9.5 3/8 40 1 9/16 96 3 3/4 85 3.0
RF2511A Transom gudgeon, alloy with Nylon bearing 9.5 3/8 - - - - 35 1.2
RF2516A Transom pintle, alloy with stainless steel pin 9.5 3/8 - - - - 69 2.4
RFPNP55 Retaining clip, transom mount, Nylon - - - - - - 5 0.2
RF413 Retaining clip 2.7mm (3/32") wire dia., 16mm (5/8") ID, s/s g oz


RF2500 Rudder Gudgeon 25/32 Wide Price: $33.96 RF2501 Rudder Gudgeon 1-1/4 Wide Price: $41.61
RF2502 Rudder Gudgeon 1-1/4 Wide Price: $40.76 RF2503 Rudder Gudgeon 1-9/16 Wide Price: $46.71
RF2504 Rudder Gudgeon 1-9/16 Wide Price: $52.66 RF2510 Transom Gudgeon 5/16 pin Price: $15.26
RF2510A Transom Gudgeon, Alloy , 5/16 pin Price: $33.96 RF2511A Transom Gudgeon, Alloy, 3/8 Pin Price: $34.81
RF2515 Transom Pintle 5/16 Pin Price: $37.36 RF2515A Transom Pintle, Alloy, 5/16 Pin Price: $45.01
RF2516A Transom Pintle, Alloy, 3/8 Pin Price: $55.21 RF413 Rudder Retaining Clip Price: $5.06
RFPNP55 Rudder Retaining Clip Price: $4.21


RaceLite Rudder Fittings

RaceLite Rudder Fittings

Rudder hardware. These are the standard fittings that are found on many dinghies since their original design.  (L) stands for Long pins -- (S) stands for Short pins. Stainless steel construction. Light, Medium, and Heavy-Duty style fittings are constructed similarly. Extra-Heavy-Duty style fittings are significantly reinforced and strengthened.  Light Duty straps are 1/16 inch thick, Med Duty and Heavy Duty  straps are 5/64 inch thick, Extra Heavy-Duty straps are 3/32 inch thick.

Part No. Use/Type # Holes Inside Width Inside Length Pin/Hole Diameter
in mm in mm in mm
RL358L Light Duty Pintle 2 3/4 19 3-1/4 83 5/16 x 1-1/4 8 x 32
RL358S Light Duty Pintle 2 3/4 19 3-1/4 83 5/16 x 1 8 x 25
RL358 Light Duty Gudgeon 2 - - - - 5/16 8
RL360L Med Duty Pintle 2 3/4 19 3-1/2 89 3/8 x 2-3/4 9 x 70
RL360S Med Duty Pintle 2 3/4 19 3-1/2 89 3/8 x 2-1/4 9 x 57
RL360 Med Duty Gudgeon 2 - - - - 3/8 9
RL390L Heavy Duty Pintle 2 1 25 4 102 3/8 x 2-1/2 9 x 64
RL390S Heavy Duty Pintle 2 1 25 4 102 3/8 x 2 9 x 51
RL390 Heavy Duty Gudgeon 2 - - - - 3/8 9
RL490L Extra HD Pintle 2 1-1/2 38 3-1/2 89 3/8 x 1-3/4 9 x 45
RL490S Extra HD Pintle 2 1-1/2 38 3-1/2 89 3/8 x 1-1/8 9 x 28
RL490 Extra HD Gudgeon 2 - - - - 3/8 9


RL358 Gudgeon LT 5/16 Pin Hole Price: $4.27 RL358L Pintle Lower LT 3/4 x 3-1/4 Price: $10.24
RL358S Pintle Upper LT 3/4 x 3-1/4 Price: $10.11 RL360 Gudgeon Med 3/8 Pin Price: $4.93
RL360L Pintle Lower Med 3/4 x 3-1/2 Price: $11.21 RL360S Pintle Upper Med 3/4 x 3-1/2 Price: $11.02
RL390 Gudgeon Heavy 3/8 Pin Price: $4.93 RL390L Pintle Lower Heavy 1 x 4 Price: $13.87
RL390S Pintle Upper Heavy 1 x 4 Price: $13.68 RL490 Gudgeon XHeavy 3/8 Pin Price: $15.17
RL490L Pintle Lower XHeavy 1.5 x 3.5 Price: $25.60 RL490S Pintle Upper XHeavy 1.5 x 3.5 Price: $25.08



RaceLite Rudder Retaining Clip

RaceLite Rudder Retaining Clip Attaches with one screw and can be rotated to one side when removing the rudder. Stainless steel. 5/8 inch wide by 1 inch long. 1/16 inch thick.

RL337 Rudder Retaining Clip Price: $2.27


Schaefer Dinghy Rudder Fittings

Schaefer Dinghy Rudder Fittings

Rudder hardware. These Schaefer light duty pintles and gudgeons are ideal for use on most prams, dinghies and small centerboard boats twelve feet and under.  (L) stands for Long pins used in lower fittings -- (S) stands for Short pins use in upper fittings.  Constructed with grade 316 stainless steel with fully welded, tapered tip pins. Available for 1/2 inch and 3/4 inch thick rudders. Two pin lengths help in getting the rudder aligned and set.  Strap stock is 1/16 inch thick.

Part No. Use/Type # Holes Inside Width Inside Length Pin/Hole Diameter
in mm in mm in mm
SC8101 Gudgeon 2 - - - - 5/16 8
SC8001 Pintle L 2 1/2 13 3 76 5/16 x -1/2 8 x 13
SC8002 Pintle S 2 1/2 13 3 76 5/16x 1-1/4 8 x 32
SC8011 Pintle L 2 3/4 19 3 76 5/16 x 1-1/2 8 x 38
SC8012 Pintle S 2 3/4 19 3 76 5/16 x 1-1/4 8 x 32


SC8001 Pintle Lower Dinghy 5/16 Pin Price: $35.76 SC8002 Pintle Upper Dinghy 5/16 Pin Price: $35.60
SC8011 Pintle Lower Dinghy 5/16 Pin Price: $36.72 SC8012 Pintle Upper Dinghy 5/16 Pin Price: $36.76
SC8101 Gudgeon Dinghy 5/16 Hole Price: $11.04


Schaefer J/24 Type Rudder Fittings

Schaefer J/24 Type Rudder Fittings

These Schaefer Medium duty pintles and gudgeon components are most familiar as J/24 type hardware but are used on small keelboats up to 25 feet in length. This high strength, easily removed design is excellent for trailerable boats. Constructed with grade 316 stainless steel.  For 1-1/2 inch thick rudders. 

Part Number Description Rudder Width Pin Diameter Strap Thickness Strap Width  Length RH Weight Number of Fasteners
in mm in mm in mm in mm in mm in mm oz g
SC8146 Transom Gudgeon HD - - 1/2 13 1/8 3 1 25 4-1/4 108 1/4 6 2 57 4
SC8147 Rudder Gudgeon Upper 1/2 13 1/2 13 3/16 5 1 25 3-5/16 84 1/4 6 10 284 4
SC8148 Rudder Gudgeon Lower 1-1/2 7.6 1/2 13 3/16 5 1 25 6-9/16 167 1/4 6 16 454 8
SC8150 Transom Gudgeon Assembly - - 3-7/8 98 1/8 3 1 25 4-1/4 108 1/4 6 8 227 8
SC8149 Pintle Pin with Clip - - 1/2 13 - - - - 3-7/8 98 - - 2 57 -
SC8544 Tiller Straps - - 3/8 10 3/16 5 1-1/2 38 12 305 1/4 6 16 454 3


SC8146 Transom Gudgeon HD J/24 Price: $48.08 SC8147 Rudder Gudgeon Upper J/24 Price: $118.00
SC8148 Rudder Gudgeon Lower J/24 Price: $135.96 SC8149 Pintle Pin w/Clip J/24 Style Price: $52.52
SC8150 Transom Gudgeon Assembly J/24 (1) Price: $151.84 SC8544 J24 Tiller Straps (pr) 3/8pin Price: $123.08


Schaefer Small Keelboat Rudder Fittings

Schaefer Small Keelboat Rudder Fittings

Rudder hardware. These Schaefer medium duty pintles and gudgeons are ideal for use on small keelboats under twenty feet.   (L) stands for Long pins used in lower fittings -- (S) stands for Short pins use in upper fittings.  Constructed with grade 316 stainless steel with fully welded, tapered tip pins. Available for 1 inch and 1-1/2 inch thick rudders. Two pin lengths help in getting the rudder aligned and set.  Strap stock is 1/8 inch thick.

Part No. Use/Type # Holes Inside Width Inside Length Pin/Hole Diameter
in mm in mm in mm
SC8141 Gudgeon w/Bush 2 - - - - 1/2 13
SC8143 STD Gudgeon 2 - - - - 1/2 13
SC8146 HD Gudgeon 2 - - - - 1/2 13
SC8045 Pintle L 4 1 25 7 178 1/2 x 2-3/4 13 x 70
SC8046 Pintle S 2 1 25 3-3/8 86 1/2 x 1-3/4 13 x 45
SC8055 Pintle L 4 1-1/2 38 7 178 1/2 x 2-3/4 13 x 70
SC8056 Pintle S 2 1-1/2 38 3-3/8 86 1/2 x 1-3/4 13 x 45


SC8045 Rudder Pintle Lower 1 x 7 Price: $68.28 SC8046 Rudder Pintle Upper 1 x 3-3/8 Price: $56.04
SC8055 Rudder Pintle Lower 1.5 x 7 Price: $80.92 SC8056 Rudder Pintle Upper 1.5x3-3/8 Price: $62.72
SC8141 Transom Gudg w/Bush 1/2 Hole Price: $75.96 SC8143 Transom Gudgeon STD 1/2 Hole Price: $63.36
SC8146 Transom Gudgeon HD J/24 Price: $48.08


Holt Transom Pintles & Gudgeons

Holt Transom Pintles & Gudgeons

Part No. Use/Type Fixing Size Inside Width Pin/Hole Diameter Pin Length Transom to Hole Center
in mm in mm in mm in mm
HA 420 Transom gudgeon 5 5-5/32 131 5/16 8.1 - - 1-17/32 39
HA4019 Transom pintle 4 - - 4/16 7.8 2-1/4 57 11/16 18
HA4019S Transom pintle 4 - - 4/16 7.8 2-1/4 57 21/32 17
HA4020 Transom gudgeon 5 2-3/4 70 5/16 8 - - 11/16 18
HA4020S Transom gudgeon 5 3 76 5/16 8 - - 21/32 17
HA4120 Transom gudgeon 5 3 76 5/16 8 - - 11/16 18
HA4317 Transom pintle 4 - - 4/16 7.8 1-15/32 37 11/16 18


HA4019 Transom Pintle, 7.8mm Pin Price: $14.65 HA4019S Transom Pintle, 7.8mm Pin, Heavy Duty Price: $47.96
HA4020 Transom Gudgeon, 8mm Pin Hole Price: $8.14 HA4020S Transom Gudgeon, 8mm Pin Hole, Heavy duty Price: $22.31
HA4120 Transom Gudgeon for 8mm Pin Price: $8.17 HA420 Transom Gudgeon Nylon Price: $5.60
HA4317 Transom Pintle, 7.8mm Pin Price: $23.84


Holt Rudder Pintles & Gudgeons: 7/8" pin

Holt Rudder Pintles & Gudgeons: 7/8" pin

Part No. Use/Type Fixing Size Width Length Pin Dia Pin Length Dist Stock to Pin
in mm in mm in mm in mm in mm
HA401723 Rudder Pintle 4 7/8 23 3-1/2 89 4/16 7.8 1-9/16 40 11/16 18
HA401735 Rudder Pintle 4 1-3/8 35 3-1/2 89 4/16 7.8 1-9/16 40 11/16 18
HA401742 Rudder Gudgeon 4 1-5/8 42 3-1/2 89 4/16 7.8 1-9/16 40 11/16 18
HA401745 Rudder Gudgeon 4 1-3/4 45 3-1/2 89 4/16 7.8 1-9/16 40 11/16 18
HA401751 Rudder Gudgeon 4 2 51 3-1/2 89 4/16 7.8 1-9/16 40 11/16 18
HA401754 Rudder Pintle 4 2-1/8 54 3-1/2 89 4/16 7.8 1-9/16 40 11/16 18
HA4017C38 Rudder Pintle 4 1-1/2 38 3-1/2 89 4/16 7.8 1-9/16 40 11/16 18


HA401723 Rudder Pintle 7.8mm Pin, 23mm Width Price: $25.99 HA401735 Rudder Pintle 7.8mm Pin, 35mm Width Price: $27.52
HA401742 Rudder Pintle 7.8mm Pin, 42mm Width Price: $27.52 HA401745 Rudder Pintle 7.8mm Pin, 45mm Width Price: $25.99
HA401751 Rudder Pintle 7.8mm Pin, 51mm Width Price: $27.52 HA401754 Rudder Pintle 7.8mm Pin, 54mm Width Price: $25.99
HA4017C38 Rudder Pintle, 7.8mm Pin, 38mm Width Price: $25.99


Holt Rudder Pintles & Gudgeons: 8" Pin

Holt Rudder Pintles & Gudgeons: 8" Pin

Part No. Use/Type Fixing Size Width Length Pin Dia Pin Length Dist Stock to Pin
in mm in mm in mm in mm in mm
HA401823 Rudder gudgeon 4 7/8 23 5-5/16 135 5/16 8 - - 11/16 18
HA401835 Rudder gudgeon 4 1-3/8 35 5-11/16 145 5/16 8 - - 11/16 18
HA401842 Rudder gudgeon 4 1-5/8 42 5-11/16 145 5/16 8 - - 11/16 18
HA401845 Rudder gudgeon 4 1-3/4 45 5-1/2 140 5/16 8 - - 11/16 18
HA401851 Rudder gudgeon 4 2 51 5-1/2 140 5/16 8 - - 11/16 18
HA401854 Rudder gudgeon 4 2-1/8 54 5-1/2 140 5/16 8 - - 11/16 18


HA401823 Rudder Gudgeon, 8mm Pin, 23mm Width Price: $26.21 HA401835 Rudder Gudgeon, 8mm Pin Hole, 35mm Width Price: $27.52
HA401842 Rudder Gudgeon, 8mm Pin Hole, 42mm Width Price: $25.99 HA401845 Rudder Gudgeon, 8mm Pin Hole, 45mm Width Price: $25.99
HA401851 Rudder Gudgeon, 8mm Pin Hole, 51mm Width Price: $25.99 HA401854 Rudder Gudgeon, 8mm Pin Hole, 54mm Width Price: $25.99


Small Rudder Pintles & Transom Gudgeons

Small Rudder Pintles & Transom Gudgeons

Rudder fittings designed specifically for the Optimist. Pin diameter is 6mm, according to Optimist class rules. Made of stainless steel, these rudder fittings are available as a complete set or as an individual fittings. Designed to be compatible for for blades up to 15mm thick.

Part Number Description
EX1150 Complete Set of Rudder Fittings.  Contains EX1160, EX1170, EX1180 *EX1150 sold separately
EX1155 12 Bolts and Self-Locking Nuts.  6 for mounting the gudgeons, 6 for the pintles/clip
EX1160 Rudder Pintles, One long and One Short
EX1160L Rudder Pintle, Long
EX1160S Rudder Pintle, Short
EX1170 Transom Gudgeon Set with Backing Plates
EX1180 Rudder Retaining Clip.  Fits around blade.  Fastened with one bolt. 


EX1150 Pintles, Gudgeons & Clip Price: $39.25 EX1155 Hardware for OP Pintles, Gudgeons & Clip Price: $5.70
EX1160 Pintle Set, Long & Short Price: $25.50 EX1160L Pintle, Long (1) Price: $15.00
EX1160S Pintle, Short (1) Price: $13.55 EX1170 Gudgeon Set w/ Backing Plates Price: $26.50
EX1180 Rudder Retaining Clip, New Type Price: $9.55


RWO Rudder Heads

View larger


RWO Rudder Heads

RWO rudderheads are renown for their reliability world-wide. They are designed to steer a sailboat positively in all aspects of sailing and wave conditions whether Olympic yachting or novice sailing.  RWO rudderheads offer a multitude of features that probably make them the stiffest, lightest, and strongest in the world. These rudderhead cover standard blade widths and are suitable for a range of dinghies and daysailers. Aluminum. Designed to fit tillers 32mm (1-1/4 inch) in diameter.

Part No. Blade Width Hood length Pintle Spacing Head Height Pivot to Lead Edge Head Base Length Hood Angle
in mm in mm in mm in mm in mm in mm degrees
R0780 13/16 21 4 102 5-3/4 146 8- 5/8 219 4 102 7-3/8 187 5
R0781 13/16 21 4 102 7-3/4 197 10- 3/8 264 5 127 7-7/8 200 0
R0783 13/16 21 4 102 8-3/8 213 13 330 5 1/16 129 8-3/4 222 4
R0802 1 25 6 152 5-1/2 140 9- 3/8 238 5 127 7-1/8 181 6


R0780 RWO Rudderhead w/Hood Price: $280.31 R0781 RWO Rudderhead w/Hood Price: $298.50
R0783 RWO Rudderhead w/Hood Price: $306.77 R0802 RWO Rudderhead w/out Hood Price: $297.95


RWO Rudder Retaining Hardware

RWO Rudder Retaining Hardware

R0767 is a spring type retainer made from stainless steel with two mounting holes and a plastic tip to prevent scratching your rudder. R8646 is a pair of wing nuts for 6mm (1/4 inch) threads and R8648 is a pair of wing nuts for 8mm (5/16 inch) threads.

R0767 Rudder Retaining Clip Price: $7.17 R8646 Rudder Head Wing Nut 1/4/6mm (2) Price: $10.75
R8648 Rudder Head Wing Nut 5/16/8mm (2) Price: $12.13

Sailing Clothing: Foul Weather Gear | Sailing Footwear | Sailing Life Jackets & PFDs | Sailing Shorts and Pants | Sailing Shirts and Rash Guards | Dry Suits and Wet Suits

Sailing Equipment: Sailboat Blocks | Sailboat Cam Cleats | Shackles and Fids | Sailboat Tillers & Wheels | Mainsheet and Traveler Parts | Sailboat Winches and Winch Handles

Sailing Gear: Sailing Watches and Timers | Sailboat Maintenance | Boat Speed, Wind & Weather Instruments | Sailing Gear Bags & Backpacks | Tools, Knives & Tension Gauges | Sailboat Compasses

Sailing Line: Hi-Tech Single Braids | Dyneema Cored Lines | Dyneema Single Braids | Vectran Cored Lines | Polyester Cored Lines | Small Diameter Lines
Annapolis Performance Sailing Limited Copyright© 2014. All Rights Reserved.

Annapolis Performance Sailing
104 Severn Avenue
Annapolis, MD 21403
(410) 268-3676