Antal deck rings are constructed from annodized aluminum for low weight and high strength. As a low friction fairlead, they are ideal for use with control lines or running rigging. They can also be used as an attachment point for rings and loops. 25/32in (20mm) aperture, 2-21/64in (59mm) long, 1-35/64in (39mm) high, 3/4in (19mm) wide, and weighs 1.55oz (44g).
With the increasing use of advanced aramid ropes, FastLeads were developed with smooth surfaces to offer a high strength ‘all direction’ lead.
Developed initially for TP52 race yachts and proven in action, FastLeads can be used as high load rope tidys around the deck. With large eyes they are ideal for securing a floating block when required. Thanks to the smooth surfaces in all directions, they will not chafe control lines or halyards. Produced from precision CNC machined aircraft grade aluminium and with a highly polished PTFE impregnated finish, there are no drill holes on the outer surface. They are secured through the base with machine screws for ultimate strength.
Available in three versions, each with five sizes to suit ropes between 4mm and 18mm diameter.
Selden's Double Fairlead is the perfect solution for anyone looking to lead out a continuous furling line aft to the cockpit. The composite bracket mounts to 25 and 30mm stansions and holds a spring loaded "push and twist" bale made of stainless steel. This design makes mounting a breeze (4 bolts that are included) and prevents line and operating snags.
Selden fairleads are designed to lead lines over the deck to achieve correct angles to a winch or block. Made of durable black anodized material with a smooth finish to reduce friction. For some applications, the fairleads can act as blocks. Works well as a lead for the windward spinnaker guy on boats up to 35’. Available in two size line diameters.
Perfect for keeping long control lines tidy and clear of
possible snags. Strongly recommended for coachroof and foredeck
applications where lines run between two fixed points
with little horizontal or vertical deflection.
Single screw mounting and a stainless steel insert.
RWO has a full line of Bridge fairleads. Bridges are used for redirecting lines.
RWO bridges are molded from high load bearing acetal resin to provide maximum resistance to wear. Four sizes to choose
Made of tough hard wearing acetal resin with rounded edges to minimize friction and be gentle on lines, these low profile fairleads are only 1/2 inch high, 1-1/8 inch long, and 3/8 inch wide. 1/4 inch aperture. The HA4153 has a stainless steel liner.
Use these items as sheet fairleads for foresails or as bow eyes/fittings. The
R2600 is moulded in black acetal resin to provide maximum resistance to wear.
The RF374 is constructed of black Nylon for abrasion resistance. The HA134 is
made of a gray-black Acetal resin.