Mini-Maxi and Maxi travelers bring hte ease of dinghy traveler adjustment to large offshore boats. Cars ride on two rows of recirculating Torlon ball bearings and roll freely under high, nonvertical loads. Custom cars for horizontally curved track available on request. Custom configurations also offered.

End controls feature energy-absorbing bumpers and come in several configurations.

Mini-Maxi and Maxi cars use HBB21 1/2" Torlon Ball Bearings. The H3068 Mini-Maxi Car uses 72 balls per car, and the H3070 Maxi Car uses 104 balls per car.

Use for mainsheet systems and self-tacking jibs.

Use H1701_ and H660_ track for mainsheets on large yachts. H1706_ and H661_ track with pinstop holes are ideal for genoa tracks. H1848_ Mini-Maxi Air Track has many applications on racing boats and is a popular choice for custom Battcar systems on large cruisers.

Track can be bent to various custom curves. See below for more information.

	Oversized Shipping:
Due to the overall dimensions of Track over 1.5m, our carriers classify them as "oversized". Please click here for more information.

The CRX Roller Traveler carries almost double the load at half the weight of similarly sized traveler car. Torlon rollers provide greatly increased bearing contact over balls to provide low friction performance--even after months of extreme loading

Toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system. The toggle serves as a stand-up for the mainsheet block.

Mini-Maxi cars are available with titanium couplers, toggles and cross pins.

Use Roller Travelers with straight track only. Use Big Boat H3173 or H3174 End Controls and H548 End Stop.

H3079_ Big Boat CRX Track has hole spacing of 3" (75mm), uses 5/16" (8mm) FH fasteners, H548 Endstops and H3080 Splice Links.

	Oversized Shipping:
Due to the overall dimensions of Track over 1.5m, our carriers classify them as "oversized". Please click here for more information.

Track is often bent to follow the cabin house curve or boom radius. Sometimes track is bent vertically, ends up, to relieve tension on the sail's leech as the traveler car moves off the boat's centerline.

To perform smoothly and carry the correct load, the traveler car's length must suit track radius. Check the description of the traveler cars for their minimum radius requirements. Remember that you can couple two cars for higher loads on tighter radii.

Minor bends can often be made when the track is installed. If the track requires more bend, we can provide track with horizontal, vertical or compound curves to your specifications for a modest charge. If the bend is continuous, add 2 to 4 inches (50 to 100 cm) to each end because track cannot be bent to its ends. Standard Harken Mini-Maxi and Maxi traveler cars cannot ride on vertical bends with a radius under 50' (15.25m).

Please call to order curved track. We cannot accept curved track orders on our website. Please have ready the following information when you call:

• Boat Model:
• Track Part Number:
• Bend Part Number: (We'll help you with this)
• Chord Length:
• Chord Depth, Horizontal or Radius, Horizontal:
• Chord Depth, Vertical or Radius, Vertical:

And which curve you want (one of the following):

• Vertical Bend, Ends Down
• Vertical Bend, Ends Up
• Horizontal Bend, End Forward or Aft
• Compound Bend, Horizontal and Vertical, Ends Down
• Compound Bend, Horizontal and Vertical, Ends Up