|
|
|||
Locoloc M1 Hand Swager |
|||
 |
This portable, hand operated roll type swaging machine comes as a kit, which includes the machine, a full set of roll dies (1/16” - 3/16”), terminal gauges, and feed guide adaptors, in a steel carrying and storage case. |
||
|
|||
|
|
|||
Locoloc Crimping Tool & Wire Cutter |
|||
 |
Multi-compression hand swager with cable cutter. An "over center" leverage transmits a powerful snap-action to the final thrust of the jaws, ensuring a tight, clean compression every time.
Swages 1/16", 3/32", 1/8", 5/32", and 3/16" oval and stop sleeves, plus 7/32 stop sleeves, for a total of 11 sizes plus the ability to cut up to 7/32" diameter aircraft quality steel cable. A tool with a dozen functions. 26 inches long, weighs 6.5 pounds. |
||
|
|||
|
|
||||||||
Hand Crimping Tool by Swage-it |
||||||||
 |
Do your own crimp swaging. Use on oval and stop sleeves. Insert your wire with fitting and wrench the tool shut.
The smaller version is to be usefor 1/16", 3/32" and 1/8" wire. The larger version is for use with 1/8", 5/32", 3/16" and 1/4" wire. |
|||||||
|
||||||||
|
|
|||||||||||||||||||||||||||||
Loos Oval Sleeves |
|||||||||||||||||||||||||||||
 |
Loos Oval Sleeves Copper with Zinc plating All Loos & Co. manufactured oval sleeves are capable of supporting a greater load than the rated breaking strength of the cable to which they are attached when properly applied. Works with Bare Cable: - 3x7 - 7x7 - 7x19 - 6x19 |
||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
Loos Stop Sleeves |
|||||||||||||||||||||||||||||
 |
Loos Stop Sleeves Copper Designed for use on wire. All Loos & Co. manufactured stop sleeves are capable of supporting a greater load than the rated breaking strength of the cable to which they are attached when properly applied. Works with Bare Cable: - 3x7 - 7x7 - 7x19 - 6x19 |
||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
|
|
|||
Felco Cable Cutters (Up to 1/2" Wire) |
|||
 |
Felco's two-handed cutter makes a triangular cut that ensures strands are cut one by one leaving a clean end. Features hardened steel blades and center bolt and unbreakable forged aluminum alloy handles with plastic covering for good grip. Used for a maximum of 3/8" wire. Weighs 3lbs (.9kgs), 19ins (48cm) long. Swiss made. |
||
|
|||
|
|
|||
Felco Cable Cutters (Up to 3/8") |
|||
 |
Designed to meet the most demanding requirements for cutting cables and steel wire up to 3/8 inch in diameter. Made using only the best components and tested at the factory to guarantee against quality defects. |
||
|
|||
|
|
|||
Felco Cable Cutters (Up to 5/8") |
|||
 |
From Felco, these two handed cutters are recommended for cable up to 5/8". Features hardened steel blades and center bolt and unbreakable forged aluminum alloy handles with plastic covering for good grip. Weighs 5lbs (2.3kg), 23in (58cm) long. |
||
|
|||
|
|
|||
Felco Heavy-Duty Wire Cutter |
|||
 |
The REAL Felco Heavy Duty Cutters. An outstandingly powerful tool for cutting steel wire rope. Has unique triangular jaws that never leaves a frayed cut. Features hardened steel blades and center bolt. Weighs 10oz (300g), 7.5in (192mm) long. |
||
|
|||
|
|
|||
Felco All-Around Cutters |
|||
 |
Innumerable are the uses for this tough, versatile little Felco cutter -- these cutters are a favorite of the APS Rigging Department. The CP cuts banding wire, tin, rubber, string, wire netting and many kinds of materials. No home or workshop should be without a Felco CP all-purpose cutter. |
||
|
|||
|
|
|||
Marson Heavy Duty "Big Daddy" Rivet Tool |
|||
 |
The "Big Daddy" is the most versatile and powerful hand riveter, taking the hard work out of setting large diameter blind rivets. Its extra-long handles provide excellent leverage and permits working a foot beyond natural reach.
Other features include a patented bearing design, self adjusting two-piece jaws and single-unit body construction with a steel insert to provide stronger threads for the nosepieces included. In addition the Big Daddy features a double gear reduction system which easily sets from 1/8" to 1/4" diameter rivets in all alloys. And a one-piece collet case eliminates the need to adjust the tool when changing rivet diameters. The Big Daddy comes with 5/32", 3/16", and 1/4" nosepieces which are stored in the body. |
||
|
|||
|
|
|||
Marson Heavy-Duty Rivet Gun |
|||
 |
The HP-2 is the largest selling hand rivet tool in the industry, this tool is known and trusted for durability, quality and performance. It's square shoulder fulcrum pin of cold-formed heat treated steel prevents pin rotation that can elongate the engaging holes and cause premature tool failure in imitation tools.
Other quality features include: precision die cast, high strength aluminum alloy body; drop forged carbon steel upper handle; and thick cushion-molded vinyl grips for comfort. The HP-2 sets up to 3/16" steel rivets and comes with four mounted nosepieces (3/32", 1/8", 5/32", and 3/16") and a service wrench. |
||
|
|||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Metal Rivets |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
