|
|
|||||||||||
Loos Rod Tension Gauge |
|||||||||||
 |
Rod Tension Gauge -4 to -12 Rod Tension Gauge Makes checking rod rigging tension quick and simple. Operates like the Pro Wire Series. Use on the cap shrouds on the J105.
Loos offers a series of gauges to measure the tension in rod rigging from .172 to .375 inch in diameter over a range of approximately 5 to 25 % of the breaking strength of the rod and provide an accuracy of + or - 5%. The "Professional Model" RT series provides an increasing durability, accuracy and convenience of use. Manufactured of rugged anodized aluminum, this gauge is corrosive resistant and will give years of service. Detailed operating instructions are included with each tension gauge. Operates in the same manner as the Professional Model Series, by allowing the cable to be adjusted while the gauge remains on the cable -- just watch the pointer move. |
||||||||||
|
|||||||||||
|
|
|||
Loos Professional Tension Gauge |
|||
 |
Professional Tension Gauge 3/16" - 1/4" Tension Gauge Manufactured of rugged anodized aluminum, this gauge is corrosive resistant and will give years of service. Detailed operating instructions are included with each tension gauge. Higher accuracy and easier to use than standard models. The cable can be adjusted while the gauge remains on the cable. "Just watch the pointer move." All readings are based on 302/304 1x19 S.S breaking strengths. Available for standard or metric rigging. Offers improved accuracy and durability. Includes instructions and wire gauge. LSPT2 (for 3/16" - 1/4" wire). Used on the D1's. |
||
|
|||
