|
|
||||||||||||||||||||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||||||||||||||||||||
F/30 Two Speed Winches by Harken |
||||||||||||||||||||||||||||||||||||||||||||
| Harken Two Speed Winches Self-tailing winches are ideal for sheets, halyards, and control lines on racing and cruising boats. The self-tailing mechanism means that one crew member can quickly and easily trim or raise sails. Two-speed winches enable quick grinding in first gear out of a tack or jibe. When the sheet loads up, the reverse direction gives more power in second gear. All have our “super holding” jaws and one-piece sculpted line guide and peeler. Winches up to the 53 have composite fiber-filled self-tailing jaws that have a gentle angle and tooth design for easy entry and “super holding” with or without load. Larger winches have aluminum jaws. Four springs ensure that jaws open evenly so line is easy to insert.
|
||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||||||||||||||||||||
F/30 Two Speed Winches by Lewmar |
||||||||||||||||||||||||||||||||||||||||||||
| Lewmar Two Speed Winches Two-speed winches enable quick grinding in first gear out of a tack or jibe. When the sheet loads up, the reverse direction gives more power in second gear. Self-tailing winches are ideal for sheets, halyards, and control lines on racing and cruising boats. The self-tailing mechanism means that one crew member can quickly and easily trim or raise sails.
|
||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||
Lewmar One Touch Handle |
||||||||
|
Lewmar One Touch Winch Handles Single Grip or Power Grip 10" With its patented “one touch” lock-in mechanism, Lewmar’s new OneTouch winch handle aims to provide sailors with a stylish, powerful and easy-to-use handle that offers rapid and simple winch entry and exit. The OneTouch handle uses a plunger pin and ball mechanism similar to that employed by the quick release steering wheels in Formula 1 racing cars. To insert, simply squeeze the handle and place it into the winch. To remove, squeeze and remove it all in one motion. Both operations can be performed one-handed. The mechanism employs two pins that automatically retract into the bi-square when the handle arm is squeezed. These pins extend when the handle arm is released, and provide a secure lock preventing the handle from being inadvertently knocked out of the winch. Insertion or removal of the handle is now achieved in one quick and easy operation instead of fumbling with traditional bi-square locks. |
|||||||
|
||||||||
View larger
|
|
||||||||||||||||||||||
Lewmar Winch Handles |
||||||||||||||||||||||
|
Lewmar ball bearing handles are available in standard and forged (race) aluminum. PowerGrip handle allows fast initial cranking and a second handle grip for serious grinding. Handle replacement kits also available. |
|||||||||||||||||||||
|
||||||||||||||||||||||
|
|
|||||||||||||||
Harken SpeedGrip Winch Handles |
|||||||||||||||
|
SpeedGrip handles are designed for the serious racer and effective in both light and heavy air conditions. The unique grip permits low-load fast cranking using the palm, and powerful two-handed grinding when loads are high. The low profile B8ASGLP is made for fast, one-handed cranking where speed is the concern, not power.
The 10" handle (254 mm) is the most comfortable handle length for most sailors - published winch power ratios are based on this length. 8" (203 mm) handles grind faster because they swing through a smaller circle, but power is reduced by 20% - these handles are ideal for smaller boats and light air where speed is more important than power. All SpeedGrip handles are lock-in handles, which are easy to engage and release with a thumb switch. |
||||||||||||||
|
|||||||||||||||
|
|
||||||||||||||||||||||
Harken Ball Bearing Winch Handles |
||||||||||||||||||||||
 |
Aluminum handles feature ball bearing grip
for smooth, comfortable operation. Ball
bearing grip ensures power is transmitted
into the winch with the greatest efficiency
and no annoying drag. |
|||||||||||||||||||||
|
||||||||||||||||||||||
|
|
|||||||||||||||
Lewmar Winch Handle Service Kits |
|||||||||||||||
 |
Kits contain everything you need to rebuild the ball bearing handle or the locking mechanism. |
||||||||||||||
|
|||||||||||||||
|
|
||||||||
Winch Mounting Ring by Harken |
||||||||
|
Use With: Harken's #32 and #40 winches
These innovative mounting rings for the #32 and # 40 winches are a great solution for servicing your Harken winches, especially if your boat has a complicated headliner; making a detailed service much easier. No need to drill new holes in the deck and never have to worry about a leaky re-install again – the deck plate never gets removed once installed so you never break the sealant seal on the deck to service your winch. We recommend installing these plates when you’re looking to install a new winch or when you’re getting ready to do a detailed service on your existing Harken winches. Class legal |
|||||||
|
||||||||
|
|
||||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||||
Harken Winch Service Kits |
||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
|
|
|
||||||||
Harken Winch Cleaners, Grease & Lubricants |
||||||||
 |
All of these products are advised for use in routine maintenance of your Harken winches, to ensure proper performance and long life:
Harken Winch Grease: a non-aging, high adhesive synthetic lubricant. It is resistant to both salt and fresh water, and protects metal gears, roller bearings, and all moving winch parts from corrosion and wear. Note: do not grease pawls, plastic rollers or balls. Harken Winch Polish: keep your winches looking brand new, with this polish for all metal winch surfaces. Harken Pawl Oil: used to lubricate pawls and springs for maximum performance. Stainless Steel Cleaner: Use on any stainless steel winch surfaces to remove surface rust. |
|||||||
|
||||||||
|
|
||||||||||||||||
Lewmar Winch Lubricants & Kits |
||||||||||||||||
 |
|
|||||||||||||||
|
||||||||||||||||
|
|
|||||||||||||||
Lewmar Spares Maintenance Kits |
|||||||||||||||
 |
LW19700501 is the small STD kit contains 12 pawls and springs and is used for both the sizes 30 and 40 winches. LW19700100 is a spares kit for non self tailing winches sizes 5 - 44 and contains 4 pawls, springs, and circular clips(Use on the Mumm 30's size 40 winches). LW19700200 is a spares kit for self tailing winches size 14ST - 66ST and contains 8 pawls, 12 springs, 3 keys, 8 sleeves, and 2 circular clips and collets(Used on the Mumm 30's size 30St winches) |
||||||||||||||
|
|||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Lewmar 30 Two Speed Self Tailing Winch Parts |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Lewmar 40 Two Speed Winch Parts |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
