|
|
|||||||||||||||
Davis Windex 15 |
|||||||||||||||
![]() |
Windex wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system. Windex is the perfect choice for all cruising and racing boats 15 feet (4.6 meters) and bigger.
Reflector tape on the vane and tacking tabs make Windex 15 easy to see day and night. Windex vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! Replacement vane (sold separately) also available. |
||||||||||||||
|
|||||||||||||||
|
|
|||
Spinnaker Halyard Clip by SOAK |
|||
![]() |
SOAK Halyard Clip Designed for Boats up to 40' Designed to prevent accidental spinnaker launches when sailing upwind and to keep the halyard from fouling during tacks. Plus, it automatically release when you're hoisting, so it's one less thing to worry about going around the top mark. Made of high quality Nylon with UV inhibitor for durability. Nylon attachment line included. Works best with lines from 5/32 (4mm) to 3/8 (9mm). We have found that it works best with stripped line because covered line is too rigid. For covered line we only recommend it up to 5/16". |
||
|
|||
|
|
||||||||
Spinnaker Halyard Keeper |
||||||||
![]() |
This double function Velcro keeper is great for securing your spinnaker
halyard before and between hoists. While going to weather, “lock” the halyard in place by Velcroing the keeper around itself. Just prior to setting the kite, Velcro the keeper flat and the halyard will pull free during the hoist. Tie it to your life line, launching bag or companionway. |
|||||||
|
||||||||
|
|
|||
High Speed Pins (Scar Pins) |
|||
![]() |
Stop fumbling with your ring-dings. Replace them with High Speed Pins for quicker rig adjustments. Insert in threaded stud hole and secure by wrapping the attached double-ended Velcro around. Won't snag kites either! Sold in packs of 8 |
||
|
|||
|
|
||||||||
Mastboot Tape |
||||||||
![]() |
Mastboot tape is a self-bonding rubber that welds to itself by chemical action to form a waterproof covering. This tape conforms to irregular surfaces, and in most cases does not require un-stepping the mast - cuts easily with scissors for easy installation. Mastboot has a very good UV resistance and will last years in the sun; canvas or acrylic cover recommended for chafe protection.
Available in two lengths - for boats up to 40', and for boats up to 60'. Comes with instructions for installation. |
|||||||
|
||||||||
|
|
|||
Spartite 2000 Mast Partner Sealant |
|||
![]() |
Spartite™ is the modern answer to the ancient problem of mast support and sealing at the partners. Spartite is a pre-measured two part polymer poured into the cavity between the mast and the partners while the mast is in the boat. Each kit comes with complete instructions and materials for the yard or yacht owner to build a simple mold out of even the most complex partners or mast collar. Spartite makes a one piece perfect fitting mast chock that replaces archaic wedges. To estimate the quantity of SPARTITE needed, measure the square inch, or square centimeter, area of the mast section and subtract that number from the square inch, or square centimeter, area of the partner opening. Multiply this number by the desired depth, which must be at least 2" (5 cm), then add 1/4" (7 mm). If you purchase too little, a further amount can always be mixed and added later. Smaller Kit I fills 51 cu in (836 cu cm) and the larger Kit II fills 102 cu in (1672 cu cm).
|
||
|
|||
|
|
|||||||||||||||
Dynaglide Teflon® Tape |
|||||||||||||||
![]() |
Put the slip on the competition with Teflon® rigging tape. This tape is specifically designed for marine applications. UV resistant pressure sensitive tape backed with a high temperature silicone adhesive. It is made of a tensilized film that provides higher tensile strength and lower elongation for improved performance. Put this tape anywhere you need to reduce friction. On the tuff luff so that your assymetric spinnaker sheets don’t get hung up while gybing. Turnbuckles and stays, spreader tips and batten pockets for smoother tacks and gybes in light air. 3 1/2 mils (1/1000ths of an inch) of an inch thick, total. Product Review: This product has been reviewed on APS' Blog, The Stern Scoop; take a look for more information. |
||||||||||||||
|
|||||||||||||||
|
|
|||
Navtec Rig-Rap Self-Amalgamating Rigging Tape |
|||
![]() |
The ultimate rigging tape. Sticks only to itself and leaves no residue. When cut, it falls off. Stretches to five times its original length. Easily conforms to irregular shapes. Puncture resistant. Cotter pins don't poke through. Not affected by sun or salt water. Doesn't dry up or deteriorate. Excellent electrical insulation properties. White. Roll measures 1" x 36'. |
||
|
|||
|
|
||||||||
Vinyl Rigging Tape |
||||||||
![]() |
From securing ring dings and pins to holding blistered hands together for one more race, just about anyone who ever sails uses this stuff by the mile. Economy or Standard we offer two grades of this UL listed, white electrical, er...rigging tape. Both are 7mm thick, 3/4 of an inch wide and 66 feet long in white. So, why do we offer both?
The Economy has a slightly less agressive adhesive and a little less stretch, but a really attractive price. If you travel a lot with your boat burning through roll after roll every weekend when you rig and de-rig your boat this is perfect for you. The Standard offers a bit more agressive adhesive on a more durable vinyl for improved holding power and stretch. It even comes with a handy dandy carrying case. This is the stuff to use if you are a set it and forget it type sailor who steps their rig once and year and rarely re-tapes things. |
|||||||
|
||||||||
|
|
|||
Weatherproof Duct Tape |
|||
![]() |
Weatherproof Duct Tape Rolls are 2" wide x 180' long. This cloth-based duct tape is made to withstand the extremes of weather. Made of a strong cloth base and very aggressive adhesive. Not the stuff from the hardware store. White or gray. These are huge 60 yard rolls - not 60 feet. |
||
|
|||
|
|
||||||||
Winch Handle Bags |
||||||||
![]() |
Winch Handle Bag Small: 4 x 11 x 3" Large: 6 x 12 x 4" Reinforced ripstop material. Stiffened pocket to always keep it open and ready to accept a handle. |
|||||||
|
||||||||
|
|
||||||||
Cockpit Bags |
||||||||
![]() |
Reinforced ripstop material. Large pocket in rear with flap cover. Small: 12 x 10" Large: 18.5 x 12" |
|||||||
|
||||||||
|
|
|||
Cockpit Combi Bag |
|||
![]() |
Reinforced ripstop material. Large pocket in rear with flap cover. Front mesh pocket and two small winch handle holder pockets. Measures: 18.5 x 12" |
||
|
|||
|
|
|||||||||||||||
Bulkhead Sheet Bags |
|||||||||||||||
![]() |
Reinforced ripstop material. Stiffened pocket to keep the pocket from collapsing when loading line tails. Small: 12 x 8 x 5" Medium: 14 x 10 x 6" Large: 16.5 x 12 x 8" Deep: 13 x 15 x 5" |
||||||||||||||
|
|||||||||||||||
|
|
|||
Sea Map Bag |
|||
![]() |
Foldover and velcro secured spray flap. Clear view plastic on both sides. 23 x 16.5" |
||
|
|||

















