APS - J/105 - Winches, Winch Handles & Accessories

J/105 Standard Two Speed Self-Tailing Winches

The J/105 uses two sizes of Harken winches: the #32 on the cabin-top and the #44 for the cockpit/jib.

These winches are self-tailing and are ideal for sheets, halyards, and control lines. The self-tailing mechanism means that one crew member can quickly and easily trim or raise sails.

Two-speed winches enable quick grinding in first gear out of a tack or jibe. When the sheet loads up, the reverse direction gives more power in second gear.

All have our “super holding” jaws and one-piece sculpted line guide and peeler. Both winches have composite fiber-filled self-tailing jaws that have a gentle angle and tooth design for easy entry and “super holding” with or without load. Four springs ensure that jaws open evenly so line is easy to insert.

If you don't see a replacement part that you need listed below, call us at 800/729.9767 and we'll get it out to you ASAP.

Part #	Description	Drum Dia.		Base Dia.		Height		Power Ratio - 1	Power Ratio - 2	Fasteners (FH)
Part #	Description	in	mm	in	mm	in	mm	Power Ratio - 1	Power Ratio - 2	in	mm
HB322ST	ST Winch, Two Speed	2-15/16	74	5-7/16	139	6-7/16	164	16.4:1	32.2:1	5 x 1/4	5 x 6
HB442ST	ST Winch, Two Speed	3-5/8	92	6-3/4	172	7-3/4	196	13.8:1	44.2:1	5 x 5/16	5 x 8

The winches pictured feature a chromed bronze drum (Harken's "C" winch finish) -- however, the standard black finish (Harken's "A" winch finish) is reflected in the part numbers below. If you would prefer the "C" finish, or any other, please contact APS at 800/729.9767 for availability and pricing.

HB322STA #32 ST Winch, Two Speed Price: $1,287.44 HB442STA #44 ST Winch, Two Speed Price: $1,868.24

Dax OneTouch Winch Handle

View larger

From the designer of the OneTouch winch handle comes the Dax OneTouch Composite Winch Handle. Notice the wider grab bar for easier releases, and the higher arc for ease of operation. The winch insert is refined for smoother insert and removal.

Made with 50% long-strand fiber filled nylon which is extremely strong and stiff. All metal parts are either 6061-T6 high strength aluminum or 316 marine grade stainless steel. The PalmGrip was upgraded in 2008 to a slightly larger, stronger yet lighter (by 2.5oz) model.

Available in Standard or PalmGrip models - the grip spins on a dual race of Grade-1 Delrin ball bearings. Length is 9.5”.

DAX101 OneTouch Palm Grip Composite Handle Price: $94.00 DAX102 OneTouch Standard Composite Handle Price: $84.00

Lewmar One Touch Handle

View larger

Lewmar One Touch Winch Handles
Single Grip or Power Grip
10"

With its patented “one touch” lock-in mechanism, Lewmar’s new OneTouch winch handle aims to provide sailors with a stylish, powerful and easy-to-use handle that offers rapid and simple winch entry and exit.

The OneTouch handle uses a plunger pin and ball mechanism similar to that employed by the quick release steering wheels in Formula 1 racing cars. To insert, simply squeeze the handle and place it into the winch. To remove, squeeze and remove it all in one motion. Both operations can be performed one-handed.

The mechanism employs two pins that automatically retract into the bi-square when the handle arm is squeezed. These pins extend when the handle arm is released, and provide a secure lock preventing the handle from being inadvertently knocked out of the winch. Insertion or removal of the handle is now achieved in one quick and easy operation instead of fumbling with traditional bi-square locks.

LW29140044 One Touch Winch Handle: 10", Single Grip Price: $112.03 LW29140046 One Touch Winch Handle: 10", Power Grip Price: $115.60

Harken SpeedGrip Winch Handles

View larger

SpeedGrip handles are designed for the serious racer and effective in both light and heavy air conditions. The unique grip permits low-load fast cranking using the palm, and powerful two-handed grinding when loads are high. The low profile B8ASGLP is made for fast, one-handed cranking where speed is the concern, not power.

The 10" handle (254 mm) is the most comfortable handle length for most sailors - published winch power ratios are based on this length.

8" (203 mm) handles grind faster because they swing through a smaller circle, but power is reduced by 20% - these handles are ideal for smaller boats and light air where speed is more important than power.

All SpeedGrip handles are lock-in handles, which are easy to engage and release with a thumb switch.

HB10ASG	10" Alum. Speed Grip Handle	Price: $107.04		HB8ASG	8" Alum. Speed Grip Handle	Price: $94.44
HB8ASGLP	8" Alum. Low Profile Handle	Price: $91.76

Winch Handle Holders

Our soft Handle holder is made of tough wearing, marine mesh material that holds its shape for easy handle storage. Triple grommets for fastener mounting.

The standard PVC holder from Lewmar is durable and fits all manufacturers handles.

LW29140020 Winch handle Pocket - Lewmar Price: $16.63 MSTC919 Soft Side Winch Handle Holder Price: $16.14

Harken Winch Service Kits

Part #	Description	Includes	Fits Winches
HBK4512	Winch Service Kit	10 Pawls & 10 Springs	HB6 - HB980
HBK4517	Lock-in Handle Repair Kit	Lock-in Knob, Spring Pin, Lock-in Spring, Isolator & Lock-in Plate	All Harken Handles
HBK4518	Winch Drum Screw Kit	8 Screws - 8mm x 20mm & 8 Plastic Washers	HB16 - HB46

HBK4512	Winch Pawl & Spring Kit	Price: $33.00		HBK4517	Winch Handle Lock-in Repair Kit	Price: $21.65
HBK4518	Winch Drum Screw Kit	Price: $29.04

Harken Winch Cleaners, Grease & Lubricants

All of these products are advised for use in routine maintenance of your Harken winches, to ensure proper performance and long life:

Harken Winch Grease: a non-aging, high adhesive synthetic lubricant. It is resistant to both salt and fresh water, and protects metal gears, roller bearings, and all moving winch parts from corrosion and wear. Note: do not grease pawls, plastic rollers or balls.

Harken Pawl Oil: used to lubricate pawls and springs for maximum performance.

HBK4513 Harken Winch Grease Price: $13.21 HBK4521 Pawl Oil for Winch Pawls and Springs Price: $10.21