Laser - Covers, Bags and Canvas Accessories

APS Laser® Deck Cover

Great for protecting your laser and your rig when storing and trailing. Our deck cover is tight fitting and very durable.

APS Laser® Deck Cover
Gray with Black Trim

Fabric: Made of hard wearing, breathable Top Gun Polyester.
Closures: A sewn in shockcord hem and webbing straps with adjustable quick-release buckles give a skin tight fit
Other: Internal reinforcement panel runs the length of the cover-store your spars to "tent" the cover and not chafe your cover. Ballistic chafe patches at the bow and gunwales beneath the Seitch dolly flip up brackets to protect from chafing. Reflective tape is sewn across the width of the transom for safety. APS decal with space for your name and sail number.

APSC159 APS Laser® Deck Cover - Top Gun Price: $234.95

APS Laser® Deck Cover

Made of breathable Top Gun polyester. Double reinforced patches at traveler eye straps, cunningham cleat and fairlead, and at bow eye. 1/4 inch shock cord in hem exits at the rear of the cover. The new style cover has built-in webbing cross straps with adjustable, quick release buckles for tight a tight fit every time. The easiest and most secure cover attachment system available. Color: gray or blue (aqua or navy: special order).

MSTL507T Laser® Deck Cover - Polyester Price: $255.22

APS Tyvek® Laser® Deck Cover

View larger

Yup. Tyvek®, this stuff is incredibly strong, waterproof and highly breathable. A great economical cover for temporary use that will protect your Laser from outdoor elements while traveling. Packs up small and weighs less than a pound.

APS Laser® Tyvek® Deck Cover
White

Fabric: Tyvek®
Closures: Shock cord hem that holds the cover securely on the boat.
Closures: Blocks 99% of UV rays. APS decal with space for your name and sail number. Easy to put on and take off.

Not recommended for general everyday use.

APSC150 APS Laser®Tyvek® Deck Cover Price: $49.95

APS Laser® Bottom Cover

View larger

Protect your laser from wear and tear, with the our bottom cover. Geat for when it's being stored on a dolly, it even has internal reinforcement to protect the cover from wearing on a Seitech dolly at contact points.

APS Laser® Bottom Cover
Gray with Black Trim

Fabric: Breathable Top Gun Polyester, Ballistic chafe patches sewn at the bow and gunwales beneath the Seitch dolly flip up brackets to protect from chafe.
Closures: A sewn in shockcord hem and webbing straps with adjustable quick-release buckles give a skin tight fit
Other: Internal reinforcement in the transom area prevents gudgeon chafing. Reflective tape is sewn across the width of the transom for safety. APS decal with space for your name and sail number.

APSC160 APS Laser® Hull Cover - TopGun Price: $234.95

APS Laser® Bottom Cover

Made of breathable Top Gun polyester. Reinforced cutout around transom gudgeons let you rig your rudder with the cover still on. 1/4 inch shock cord in hem exits at the rear of the cover. The new style cover has built-in webbing cross straps with adjustable, quick release buckles for tight a tight fit every time. The easiest and most secure cover attachment system available. Color: gray or blue (aqua or navy: special order).

MSTL505T Laser® Bottom Cover - Polyester Price: $255.22

APS Full Travel Boat Cover

Made of breathable Top Gun polyester. This all in one cover offers the best protection for your Laser® hull. Zipper runs all around the edge, double reinforced patches in high chafe areas, and the new style cover has built-in webbing cross straps with adjustable, quick release buckles for tight a tight fit every time. A bit more time consuming to put on than a traditional top and bottom cover, but offers a sealed fit with no openings, to keep dirt and weather out. Color: gray or blue (aqua or navy: special order).

MSTL508 Laser® - Travel Cover, Full-Zip Price: $456.51

OP Moistureguard Laser ®Top Cover

Made from Moistureguard 2000, a highly breathable, water resistant, heavy duty 900D polyester with a polyurethane membrane. Helps reduce the risk of blisters when the boat is covered damp. Has a wide skirt with shock cord in hem and three adjustable quick-clip buckles. Light gray.

EX2040 Laser Deck Cover - MG2000 Price: $221.05

OP Moistureguard Laser® Bottom Cover

Made from Moistureguard 2000, a highly breathable, water resistant, heavy duty 900D polyester with a polyurethane membrane. Helps reduce the risk of blisters when the boat is covered damp. Has a shock cord in the skirt hem. Webbing loops are installed to be able to pull the cover tight during transport. Light gray.

EX2045 Laser Hull Cover - MG2000 Price: $268.65

WinDesign Economy/Club Covers

Top Cover: made from a super-strong 1680D PVC Coated Polyester. 100% Water Resistant, but this cover is NOT breathable. (Color: Blue)

Bottom Cover: made of a strong, yet flexible, 600D Polyester PU coated material. Rope in the skirt and webbing loops are installed to be able to pull the cover tight around the hull during transport. (Color: Light Grey)

EX2041 Laser Deck Cover - Blue Price: $166.75 EX2044 Laser Hull Cover - Grey Price: $155.00

Laser® Step Stopper by Right On Trailer

Easy and inexpensive way to prevent water/ice and debris from accumulating in the mast step while the boat is stored on a dolly or trailer. Made of closed cell foam that won't soak up water. Simply insert the stopper into your mast step and there's no room for water!

ROTLSS300 Laser® Step Stopper Price: $14.99

Laser® Trademark

Notice: Laser®, Radial and the Vanguard Logos are registered trademarks of Laser Performance. Annapolis Performance Sailing and all North American Laser dealers are licensed to sell Laser sailboats and Laser trademarked merchandise from Laser Performance Inc. within North America, the Caribbean, Bermuda, Central America and Venezuela. Boats and merchandise must be picked up or delivered within these areas.