This kit comes with everything you need to quickly upgrade to a 10:1 Cunningham & 6:1 Outhaul. When installed, this kit leads the outhaul and cunningham back to the cockpit, for easier handling - this allows you to make adjustments faster to maximize your boatspeed.
The deck hardware reuses the existing mounting screw holes from the cunningham fairlead and clam cleat. No additional drilling into the deck required. A list of the kits contents is given below:
No more losing your outhaul block - we've solved the problem and spliced it on. A Harken Micro with becket is spliced onto Amsteel with the other end unfinished, but long enough to cut to the appropriate length for your set up. Practical and easy.
Harken Cunningham/Outhaul Cam Cleat Bases & Turning Blocks:
- Standard with the Laser Cunningham & Outhaul Upgrade Kit
Both deck plates are available individually with their Harken hardware already attached. The Cam Cleat Base has two H423 Harken Carbon Cam Cleats with H372 X-Treme Angle Fairleads preattached with bolts and lock nuts. The Fairlead Base Plate has two Harken H376 Forkhead 16mm Airblocks.
Holt Allen Cunningham/Outhaul Cam Cleat Bases & Turning Blocks:
Both deck plates are available individually with their Holt Allen hardware already attached. The Cleat base plate has two HA677 Holt Carbon Cam Cleats with HA4665 Holt Fairlead cages pre-attached with bolts and lock nuts. The Fairlead Base Plate has two Holt Allen HA4250PF blocks.
If you would like to customize the setup of your Vanguard Cam Cleat Base (APS Part #: LP91301), these four cam cleats will all fit the hole pattern that is used. For each Cam Cleat Base you will need to order two cam cleats and two fairleads.
Use the table below to identify the Cam Cleat & Fairleads that you need (click on the image above to view pictures of each setup).
Cam Cleat Part Number
Fairlead Part Number
* - Please note that the Ronstan Cam Cleats require the use of the RST015 Wedge Kit, in order to raise the overall height of the cleat enough that lines will be held securely in place.
Notice: Laser®, Radial and the Vanguard Logos are registered trademarks of Laser Performance. Annapolis Performance Sailing and all North American Laser dealers are licensed to sell Laser sailboats and Laser trademarked merchandise from Laser Performance Inc. within North America, the Caribbean, Bermuda, Central America and Venezuela. Boats and merchandise must be picked up or delivered within these areas.