• Fabric: Breathable Top Gun Polyester, Ballistic chafe patches sewn at the bow and side deck rails.
• Closures: sewn in shock cord hem and webbing straps with adjustable quick-release buckles give a skin tight fit
• Other: Top of the cover extends at the transom to allow you to store your sail and spars fully protected under the cover, Tie the top and bottom cover together with the webbing loops at the stern to reduce flapping while trailing, Reflective tape is sewn across the width of the transom for safety, APS decal with space for your name and sail number.

• Fabric: Made of breathable Top Gun Polyester. Ballistic chafe patches sewn at the bow, port and starboard rails to protect the cover from wearing on a Seitech dolly when upside down. Three large closed cell foam pads are sewn on the bottom of the cover to protect your hull from scratches when placed on the ground.
• Closures: A sewn in shock cord hem and webbing straps with adjustable quick-release buckles give a skin tight fit.
• Other: Internal reinforcement in the transom to gudgeon chafing. A reflective tape is sewn across the width of the transom. All our covers and bags have a decal with a space for your name and sail number.

Made of Top Gun polyester, this cover provides full hull protection. Top panel flap zips off (with sturdy zipper), allowing you to sit the hull inside on the padded bottom. Once inside and zipped, closed top can be adjusted with cross-tie webbing straps and quick-release buckles for a skintight fit. The bottom has the same padded bottom design as our bottom cover below. Two inch-wide webbing straps run under the cover/boat and are sewn in for use as heavy duty carry handles.
Colors: Gray or Blue.

• Fabric: Made of breathable polyester with a polyurethane membrane. Micro-pore membrane is waterproof but allows water vapor to pass to the outside.
• Closures: Shock cord in hem holds the cover on for day to day use. Adjustable quick release buckles on 1" webbing offer a tight fit and quick on/off of cover.
• Other: Enough room to store your spars under the cover which keeps water from collecting.

• Fabric: Made of breathable polyester with a polyurethane membrane. Micro-pore membrane is waterproof but allows water vapor to pass to the outside.
• Closures: Shockcord in hem; two adjustable webbing straps with quick release buckles.
• Other: Two closed cell foam pads on the bottom.

• Fabric: Tyvek.
• Closures: Shock cord hem holds the cover securely on the boat.
• Other: Easy to put on and take off. Blocks 99% of UV rays. APS decal with space for your name and sail number.

• Fabric: Our Pro bag is made of “bullet proof” Top Gun Polyester. Fully Padded with high density Volara foam (the high end quality foam found in life jackets).
• Closures: has a full Velcro entry top with separate compartments for your rudder (with tiller attached) and daggerboard.
• Other: Huge, mesh, side-bellow pocket with Velcro opening . Inside this pocket is a second smaller flat Velcro opening pocket for smaller items. Wide removable and adjustable shoulder strap and carry handles. APS decal with space for your name and sail number.

• Fabric: High denier coated nylon and polyester. Padded throughout.
• Closures: Side zipper entry separates compartments for daggerboard and rudder/tiller. External Velcro entry storage pocket.
• Other: Carry handle and shoulder straps. APS decal with space for your name and sail number.

• Fabric: Constructed of Cordura.
• Closures: Zipper closure.
• Other: Two sewn pockets run the length of the bag-one side holds the spars and the other can slide a 6" wide drain PVC tube inside to stiffen the bag and keep your sail protected (PVC tube not included). Adjustable and removable shoulder strap and handle. APS decal with space for your name and sail number.

• Fabric: Nylon bag.
• Closures: Drawstring closure.
• Other: Plenty of space to fit Opti sails and spars. Two handles for carrying. APS decal with space for your name and sail number.