Extra low profile design is ideal for limited space applications or for use on spars to reduce windage, fouled lines and annoying snags. Smooth edges protect your lines from chafe and wear. Strong black hard anodized lightweight aluminum with the strength and corrosion resistance needed for years of reliable service. Max Height is for the cleat only and is measured at the ends of the horn, as the top of the cleat's horn is curved downward slightly in the middle.
Helps prevent loose halyard ends from running up the mast. Line ends can be inserted through the open base and knotted for an easily grabbed dead end. Strong black hard anodized lightweight aluminum with the strength and corrosion resistance needed for years of reliable service.
Large base design spreads heavy loads for dock, mooring or anchor line use. Smooth edges protect your lines from chafe and wear. Strong, yet lightweight aluminum offers an advantage over easily "burned out" plastic or heavy stainless designs.
Schaefer's unique deck mounting system allows you the flexibility you've always wanted on your deck. Whether you need a cleat, padeye, block or need a flush deck while underway, the one mount will do the job.
The stainless steel cleat locks into place with a 1/4 turn and push. Remove by lifting the two flush release levers and again turning. You may then replace the cleat with a screw-in stainless steel eye that is idea for tie downs, dinghies, safety gear, life rafts or anything else you can think of. The stainless Series 8 Stand-up Block is ideal for use as an afterguy or any line that needs a clean, strong lead.
Excellent for use with halyards, genoa/jib sheets or reefing lines. Jam shaped base allows for easy quick adjustments and cleating of highly loaded lines with a single wrap on the cleat. One wrap around the V-shaped base section locks line in the cleat. Strong black hard anodized lightweight aluminum with the strength and corrosion resistance needed for years of reliable service.
Molded from high-strength glass-reinforced Marelon, these Forespar cleats are lightweight and virtually indestructible. The use of Marelon allows these cleats to take up the curve or a deck without breaking, while maintaining strength and resisting abrasion -- will not soften on hot days or freeze in the winter.
The Cleatboot by proBoat is a simple way to make sure that your sheets & sails don't get snagged on a horn cleat anymore.
The Cleatboot use two high strength plastic chocks and heavy-duty 3/16" shock cord to create a tight fit around any cleat, creating an angled layer of protection for sheets, toes & sails. No more having to use numerous layers of tape or drilling in snaps for canvas covers -- the shock cord allows you to easily install and remove from your boat before and after racing.
Each kit comes with four chocks to cover two cleats, and the necessary shock cord. Works on any horn cleat that rises above the deck more than 5/8" (16mm), and can be adapted to almost any length.