Great for cleating a line right where it comes out of the spar or through a deck. Requires 2x #10 (5mm) RH fasteners.

The H238 and H239 Cam Cleats on Plates with Bullseyes come with 2x #10 (5mm) RH fasteners, and the H379 comes with 2x #8 (4mm) RH fasteners.

The H240 and H241 are simple swivel bases for main and jibsheets on very small boats or for control lines on boats of any size. Both units come with H425 Black Flairleads. 3x #10 (5mm) FH fasteners are NOT included.

Also known as "Headbanger" blocks, these feature Bullet or Big Bullet sheaves on a pivoting body and are great for under-boom mainsheets or spar-mounted halyards and control lines. Requires 2x #10 (5mm) RH Fasteners.

Selden deck swivels are designed to follow the movements of the trimmer. Used for main sheets on keelboats and smaller yachts. It can also function on bigger boats if the purchase of the tackle is sufficient. The swivel has a vertical articulation that can be easily adjusted from a flat horizontal lead to a steep 45 degree angle. Deck swivels are comprised of composite and stainless steel.

RF7: The RF7 has a medium C-Cleat and Fairlead. Features a height adjustable arm for optimum cleating angle, and twin ball bearing race. An adjustable-tension ratchet system prevents the arm from falling to leeward, and they can be set up to swivel through either 360° or be restricted to 260°.

RF8: The RF8 has a medium C-Cleat with Fairlead. The arms are fabricated from 8mm alloy plate for heavy duty applications. Swivels through 360°.

For both models, the fork has a 5mm pin to permit direct attachment to the head post of a block without a shackle. You can reverse the cleat on all four for a downward release and upward cleating action, or use it in its standard configuration for an upward release and downward cleating action. Great for mainsheet systems on dinghies and sportsboats up to 8m (26').

* Line size only takes cleat into account, and may be further restricted by choice of block.

A revolution in swivel bases. Has a light weight wire frame construction for superior torsional rigidity. In the high-load ball bearing base Delrin ball bearings ensure smooth rotation while stainless steel balls bear vertical load and nearly eliminate vertical play. Carbon cam cleat with fairlead cage. Adjustable base pins that allow you to determine the arc of swing and keep the arm from falling to leeward when the sheet is not under tension. Great for dinghies and small keel boats.

Hole spacing is on a four-hole pattern with 20mm spacing on centers. Use M5 (3/16") fasteners.

The RF60 features adjustable stops to limit rotation, which can also be removed for 360° rotation. The A-Cleat cam cleat is mounted on a heavy gauge aluminum arm for stiffness under load. The heavy-duty bullseye fairlead has a flared stainless steel liner to reduce friction and wear. Unlike other bullseye swivel bases, the bullseye on the RF60 stays stationary relative to the boat while the cam arm swivels around it. This allows use in higer load applications like vang control on a small keelboat or sportboat, or pole launcher on an FD or 505.

Suits line from 3 to 12 mm (1/8" to 1/2"). Working load is 175 kg (385 lb) and breaking load is 350 kg (770 lb). Use 4x 5mm (3/16") fasteners on square pattern, with hole centers 20mm (25/32") apart on each side.

RF5: Made from lightweight fiber reinforced composite. The sheave has two possible positions to accomodate leading the line from above or from below and to allow the whole unit to be inverted to allow cleating in an upward or downward motion in relation to the lead of the line. The RF5 can be mounted to a slightly convex curved surface.

RF20175: Stainless parts are Grade 316. Can be mounted to lead line from above or below, and the cam cleat can be inverted to provide the desired cleating motion relative to the lead of the line. If the cleat is inverted you will not be able to use the fairlead.

Lines lead from below-deck through a stainless steel bushing to cam cleat. Mounts on any flat surface. We use these for dinghy control lines, outhauls on big boats (mounted on underside of boom), etc. Two sizes fit small and medium cleats from Harken and Ronstan (sold separately).

Mounts on vertical surfaces. Line feeds up through tube and over a sheave to swiveling cleat base. Cleat mounting holes are 38 mm (1 1/2") apart on centers which fits Harken and Ronstan medium cam cleats. Mounting holes for the unit itself are in a rectangle 19mm (3/4") x 38 mm (1 1/2"), based on centers, and uses 5 mm (3/16") fasteners.

The rebuild kit comes with everything you need to make your tired old swivel as good as new for a fraction of the cost. Replacement parts are also sold separately.