The PXR racing camcleat features a three stage adjustment spring allowing users to select the release setting for the application and prevailing conditions. Lighter settings for continuously trimmed sheets, traveller controls, vangs and similar controls. Harder for halyards and occasionally adjusted lines. The roller action of the PXR ensures easy release of lines as wind load increases

With a large grip area, the PXR is kind to lines, and stainless steel rope guides provide a wide operating arc and smooth running. You can replace existing cam cleats with the T-Series and swivel bases with the SW-Series. Hole patterns are designed to match popular cam cleats and swivel bases so you don't have to drill new holes. The VP-Series is designed for mast mounting.

Fasteners not included. The swivel versions swivels through 360°. The SLPXR0206SW has a radius of 45mm (1 25/32"), and the SLPXR0810SW has a radius of 55.9mm (2 13/64"). Swivel base has three equilaterally spaced mounting holes.

* Though this product is rated for 3/32" to 1/4" (2 to 6mm) line, we do not reccommend it for any 3/32" (2mm) line and only for 1/8" (3mm) line with looser covers, as tighter covered lines and 12 strands will slip.

** We have had some reports of difficulty using 3/8" (10mm) line. If the line is tight, try rotating the spring tension selector knob to the right, opening the hole as much as possible. However, there may still be problems with some 3/8" line.