|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Replacement Dry Suit Seals |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Replacement Dry Suit Seals Black XS - XL [Sizing Chart] All our seals are original manufacturers material and 100 percent latex rubber. Home installation is accomplished using Aquaseal adhesive which dries in 24 hours. The addition of Cotol-240 speeds up full cure time of Aquaseal to 2 hours. Ask for our installation tips sheet. Adhesives sold separately. We sell dry suit seals for home installation only. The rule of thumb is to match the seal size to the size of your dry suit. Installing all five seals will usually consume two tubes of Aquaseal. Feel free to call us at (800)729-9767 for assistance in selecting the right replacement seal for your dry suit. Wrist and Ankle Seals are available just one seal (single) or as a pair.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||
McNett Aquaseal Products |
||||||||||||||||||||||
 |
McNett Aquaseal Products Designed to clean your dry suit and protect your zippers to ensure a tight seal. A: Seal Saver: Apply this liquid seal conditioner periodically to prevent dry rot. B: Zip Care: Cleans and lubricates dry suit zippers. Has stiff bristle brush top for scrubbing. C: Zip Tech: Zipper lubricant protects against rust corrosion chlorine and salt. D: Cotol-240: Accelerator added to Aquaseal (below) speeds drying time to 2 hours. Also use to pre-clean areas to be bonded. E: Aquaseal: Adhesive/sealant for home repair of seals. Dries in 24 hours. |
|||||||||||||||||||||
|
||||||||||||||||||||||
|
|
||||
ReviveX Cleaner & Water Repellent Wash |
||||
 |
Revivex High Tech Fabric Cleaner: Specialized formula designed to clean all types of outerwear including rainwear, skiwear, soft shells, fleece and synthetic insulation. Essential preparation for treatment with ReviveX brand water repellents. Ideal for GORE-TEX and Windstopper garments and other waterproof and breathable garments.
ReviveX Wash-In Water Repellent: Easy to use in home washing machines. Creates new Durable Water Repellent (DWR) coating to make water bead off foul weather gear, skiwear, windwear, hats, gloves and more. Ideal for GORE-TEX and Windstopper garments and other waterproof and breathable garments. Water based formula. For garments with wicking inner liners, use the spray-on version of ReviveX Water Repellent. |
|||
|
||||
|
|
||||||||
Revivex Water Repellent Spray |
||||||||
 |
GORE® shell fabrics (and most waterproof materials) are treated with an active durable water repellent (DWR) fluoropolymer. With normal use, DWR is eventually worn off.
Use Revivex to restore a garment’s DWR. Revivex coats areas of the fabric where the original DWR has worn off. It also ‘mates’ with the remaining DWR to restore water and stain repellency. Ten ounces treats approximately four garments. |
|||||||
|
||||||||
