|
|
|||||||||||||||||||||||||||||||||||||||||||
Aquabatten Dinghy 3/8 Inch Tapered Battens |
|||||||||||||||||||||||||||||||||||||||||||
 |
Taper-laminated glass fiber Aquabattens have become recognized standard for the world's racing dinghy sailmakers. Dinghy Aquabattens are specifically designed as a lightweight durable leech batten for dinghy sails, and are suitable up to a boat size of approximately 18 feet.
10mm (3/8"). Lengths are with end caps fitted. End caps are sold separately. |
||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||
Aquabatten Dinghy 5/8 Inch Tapered Battens |
||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Taper-laminated glass fiber Aquabattens have become recognized standard for the world's racing dinghy sailmakers. Dinghy Aquabattens are specifically designed as a lightweight durable leech batten for dinghy sails, and are suitable up to a boat size of approximately 18 feet.
15mm (5/8"). Lengths are with end caps fitted. End caps are sold separately. |
|||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Untapered Batten Stock |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Batten stock is made from non-tapered pultruded fiberglass. A great, economical solution to replace existing production sail battens. Sold by the foot.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||
Aquabatten Dinghy 5/8 inch Top Compression Battens |
||||||||
 |
Taper-Taminated glassfiber Aquabattens have become the recognized standard for the world's dinghy sailmakers. Standard Top battens provide more support and are designed as full length battens for sails with a limited roach. Endcaps are sold sepreately. Lengths are with end caps fitted. |
|||||||
|
||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||
Aquabatten Keelboat 1-1/4 Inch Tapered Battens |
||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Aquabattens offer many advantages. They are preferred in more modern designs, where long battens are permitted and the battens extend further into the body of the sail. Standard: The forward tip is soft, while the leech end has a stiffness comparable to the extra stiff battens. Stiff: These battens are designed for use in the intermediate positions in the sail where it requires more roach support, or alternatively for use in the top position in heavier weather conditions. Extra Stiff: Designed for use in intermediate and lower positions in the sail, where the requirement is to keep the leech very flat. End caps are sold seperately. Length exclude end caps.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||
Batten End Caps |
||||||||||||||||||||||
 |
These batten caps securely slide onto batten ends. You may need to heat the caps with a hair dryer or heat gun for easier fitting. BB10DEC have a maximum width of 5/8", BB15DNEC have a maximum width of 11/16", and BB15DWE have a maximum width of 1-1/2". |
|||||||||||||||||||||
|
||||||||||||||||||||||
