|
|
|||
Cleatboot by proBoat |
|||
 |
The Cleatboot by proBoat is a simple way to make sure that your sheets & sails don't get snagged on a horn cleat anymore.
The Cleatboot use two high strength plastic chocks and heavy-duty 3/16" shock cord to create a tight fit around any cleat, creating an angled layer of protection for sheets, toes & sails. No more having to use numerous layers of tape or drilling in snaps for canvas covers -- the shock cord allows you to easily install and remove from your boat before and after racing. Each kit comes with four chocks to cover two cleats, and the necessary shock cord. Works on any horn cleat that rises above the deck more than 5/8" (16mm), and can be adapted to almost any length. |
||
|
|||
|
|
||||||||||||||||||||||
Davis Windex 15 |
||||||||||||||||||||||
 |
Windex wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system. Windex is the perfect choice for all cruising and racing boats 15 feet (4.6 meters) and bigger.
Reflector tape on the vane and tacking tabs make Windex 15 easy to see day and night. Windex vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! Replacement vane (sold separately) also available. |
|||||||||||||||||||||
|
||||||||||||||||||||||
|
|
||||||||
High Speed Pins (Scar Pins) |
||||||||
 |
Stop fumbling with your ring dings. Replace them with HS pins for quicker rig adjustments. Insert in threaded stud hole and secure with attached double-sided Velcro. Won't snag kites either. Sold in packs of eight. |
|||||||
|
||||||||
|
|
|||
Loos Rod Tension Gauge |
|||
|
Rod Tension Gauge Works on both V1 and D1 Loos offers a series of gauges to measure the tension in rod rigging from .172 to .375 inch in diameter over a range of approximately 5 to 25 % of the breaking strength of the rod and provide an accuracy of + or - 5%. The "Professional Model" RT series provides an increasing durability, accuracy and convenience of use. Manufactured of rugged anodized aluminum, this gauge is corrosive resistant and will give years of service. Detailed operating instructions are included with each tension gauge. Operates in the same manner as the Professional Model Series, by allowing the cable to be adjusted while the gauge remains on the cable -- just watch the pointer move. |
||
|
|||
View larger
|
|
|||||||||||||||||||||
 |
|||||||||||||||||||||
Micronet Race Master by TackTick |
|||||||||||||||||||||
| The next generation of TackTick's popular Master Series, the Micronet Race Master comes loaded with user and installation friendly features. Its two-tier display shows your heading, how far you are above or below the mean course, and how much you are being headed or lifted. It will enable you to establish quickly and easily which is the favored end of the start line, and will help you sail the shortest distance to the windward mark. Downwind, you can see how far off dead downwind you are, and when you should gybe for optimal VMG.
The Race Master is a wireless device, so there are no wires to run or connections to make during installation. It also features three level backlighting, a battery level indicator, waterproofing up to 10m (~33 ft.) and a lightweight (1.0 lbs), shock resistant display with super-large digits for easy viewing anywhere on your boat. The unit will display the following data: compass heading, wind shifts, line bias and a race timer. The system can then be further extended to allow the addition of Boat Speed, Depth, Wind and GPS information as well as compatibility with the complete range of Micronet Displays. With the multitude of options that are available with the Micronet system, you can create your own personalized system with ease. |
|||||||||||||||||||||
|
|
|
||||||||
Pop-Out Protest Flag and Yellow Flag |
||||||||
 |
Tie it to your boom or backstay and pull the cord to launch the flag. When you are done stuff the flag back in the pouch and Velcro it shut - protected from the sun. Mad for keelboats, protest and Yellow flags are 11.5 x 11.5 inches. |
|||||||
|
||||||||
|
|
|||
Rig-Rap Self Amalgamating Rigging Tape by Navtec |
|||
 |
The ultimate rigging tape. Sticks only to itself and leaves no residue. When cut, it falls off. Stretches to five times its original length. Easily conforms to irregular shapes. Puncture resistant. Cotter pins don't poke through. Not affected by sun or salt water. Doesn't dry up or deteriorate. Excellent electrical insulation properties. White. Roll measures 1" x 36'.
|
||
|
|||
|
|
|||
Sail Chafe Protector by Harken |
|||
 |
Help protect your sails from snags. Can be used on lifelines, in front of each stanchion to help the foot of the genoa roll over the lifelines during a tack. Also, can be used on above each spreader to protect the mainsail and genoa from chafing on spreader tips. Sold in pairs |
||
|
|||
|
|
||||||||
Spinnaker Halyard Cam Base |
||||||||
 |
One of the major "trouble" spots in a race can be the spinnaker launch and takedown -- coordination between the people running the mast and pit has to be perfect and speed (as always) is key. With seconds being crucial, this spinnaker halyard cam base is a perfect way to speed things up while making things easier in the pit.
Here's how it works: - the launch of the spinnaker is made easier because when the halyard is jumped at the mast, because the cam is now reversed and captive. This takes the pressure off the person jumping the halyard to try and get that last pull into a mast-mounted cam. At the same time, the person running the pit does not have to worry about the spin halyard until things have calmed down and can focus on other duties. - the douse is made easier because the person running the pit can now easily disengage the spin halyard from the pit with a simple tug of the halyard, bringing it flush with the mast. This allows the person running the mast to assist with the collection of the spinnaker. Cam cleat not included -- Cam cleat is a Harken 150 or you can use the existing cam cleat on your boat. You'll need to drill two additional holes for this cam base; don't forget to use a product like Duralac to prevent electrolytic corrosion. |
|||||||
|
||||||||
|
|
||||||||
Vinyl Rigging Tape |
||||||||
 |
From securing ring dings and pins to holding blistered hands together for one more race, just about anyone who ever sails uses this stuff by the mile. Economy or Standard we offer two grades of this UL listed, white electrical, er...rigging tape. Both are 7 mils thick, 3/4 of an inch wide and 66 feet long in white. So, why do we offer both? The Economy has a slightly less agressive adhesive and a little less stretch, but a really attractive price. If you travel a lot with your boat burning through roll after roll every weekend when you rig and de-rig your boat this is perfect for you. The Standard offers a bit more agressive adhesive on a more durable vinyl for improved holding power and stretch. It even comes with a handy dandy carrying case. This is the stuff to use if you are a set it and forget it type sailor who steps their rig once and year and rarely re-tapes things. |
|||||||
|
||||||||
