|
|
||||||||
RWO Screw-In Type Drain Plug |
||||||||
![]() |
Black Plastic. Same size hole (7/8 inch) as the older white quarter-turn type assembly listed below, but with a better seal with a rubber O-ring. The screw-in bungs are also fitted with a retainer to help prevent loss. Sold as a complete assembly or just a replacement bung. Our most popular drain plug by far. |
|||||||
|
||||||||
|
|
||||||||
RWO 1/4 Turn Drain Plug |
||||||||
|
White Plastic. 7/8 inch mounting hole. The older style. Bungs twist 1/4 turn to close. The bungs are fitted with a retainer to help prevent loss. Sold as a complete assembly or just a replacement bung. |
|||||||
|
||||||||
|
|
||||||||
Ronstan Screw-In Drain Plug |
||||||||
![]() |
Black Nylon with a red plastic washer. 15/16" (24mm) mounting hole. The screw-in bungs are also fitted with a retainer to help prevent loss. Sold as a complete assembly or just a replacement bung. |
|||||||
|
||||||||
|
|
||||||||
Ronstan Screw-In Drain Plug - Chrome |
||||||||
![]() |
Chromed brass body with a red plastic washer. Black Nylon plug. (24mm) mounting hole. The screw-in bungs are also fitted with a retainer to help prevent loss. Sold as a complete assembly or just a replacement bung. |
|||||||
|
||||||||
|
|
||||||||
Ronstan Screw-In Drain Plug - White |
||||||||
![]() |
White body with a blue plastic washer. White Nylon plug. Sold as a complete assembly or just a replacement bung. The PNP158 has a 1-9/16" (39mm) mounting hole and only fits the older PNP158 assembly. |
|||||||
|
||||||||
|
|
|
Selden Retaining Bung (Needs part numbers) |
|
![]() |
Selden Retaining bung. Made for 2.5 mm / 3 mm T-terminals |
|
|
||||
Ronstan Screw-In Drain Plug - Black |
||||
![]() |
Black body with a blue plastic washer. Black Nylon plug. Sold as a complete assembly or just a replacement bung. 1-5/16" (49mm) mounting hole. |
|||
|
||||
|
|
|||
Holt Allen Screw-In Drain Plug |
|||
![]() |
Gray. Screw-in hole spacing matches the RWO bung - Assembly mounting hole is slightly larger than the RWO (should fit without enlarging existing hole). Bung is captive. Seals with rubber O-ring. Sold as an assembly only (replacement bungs are not available separately).
|
||
|
|||
|
|
||||||||
Holt Allen Drain Plug - Fits RWO |
||||||||
![]() |
New from Holt Allen, this black bung will fit both a standard (RWO) socket and it's own as well. It seals with a rubber O-ring and has a loop end!
|
|||||||
|
||||||||
|
|
||||||||
Beckson Screw-In Drain Plug |
||||||||
![]() |
Screw-type drain plug with patented self-cleaning thread design, O-ring, and super strength center retaining legs to secure the center while draining. Ideal installation for transom of personal watercraft, small boats, fish wells, coolers, ice chests, water tanks, etc. Part should be mounted in a 1" ID hole with two S/S fasteners and positioned with gap in thread at lowest point.
|
|||||||
|
||||||||
|
|
||||||||||||||
![]() |
||||||||||||||
Rubber Push-Fit Drain Plug Bungs |
||||||||||||||
| APS stocks a number of different Push-Fit Rubber bungs that are used as drain and cockpit plugs on numerous dinghies. The red RWO plugs will fit RWO thru-deck fittings (sold separately). |
||||||||||||||
|


View larger












