Selden system 30 is used for keelboats and yachts up to approximately 45'. The genoa car is black anodized aluminium with slide rods and pinstop operated. The sheave house of the genoa car is AISI 316
mirror finished stainless steel. The function of the end cap is to keep the cars on track. The genoa cars are available for pinstop operation and for control lines. Genoa car and end controls come with integral beckets for control lines. The Ø60 mm main sheet sheave and the Ø80 mm genoa sheave have plain bearings for vertical loads and Torlon® ball bearings stabilize the sheave when subjected to side loads. The suitable max size of control line is Ø10mm. Cam cleat 38 used on end controls.
The sheave house on a genoa car articulates 40° sideways, 8° aft/
forward and can also twist to a certain extent. Enables the sheave to align correctly to the sheet direction, particularly important when installed on curved surfaces.
For the genoa car + sheet lead, the sheet lead is used to send the sheet correctly to a winch with a shallow angle. A genoa car + becket, two cars are used to set up and position a new sail for sail changes. Uses a longer track and a cable or line to connect the cars. All safe working
loads for Seldén genoa cars are based on 70° sheet angle.
| Genoa System 42 |
| Part # |
Description |
Length |
Width |
Weight |
Safe Working Load |
Breaking Strength |
Purchase |
| in |
mm |
in |
mm |
oz |
g |
lb |
kg |
lb |
kg |
| SLD44411601 |
Genoa Car, Pinstop |
9.80 |
249 |
3.85 |
98 |
79.36 |
2250 |
6062 |
2750 |
12125 |
5500 |
-- |
| SLD44411201 |
End Control* |
4.96 |
126 |
2.75 |
70 |
17.98 |
510 |
-- |
-- |
-- |
-- |
4:1/5:1 |
| SLD44411202 |
End Control with Cam Port* |
4.96 |
126 |
3.93 |
100 |
22.08 |
626 |
-- |
-- |
-- |
-- |
4:1/5:1 |
| SLD44411203 |
End Control with Cam Starboard* |
4.96 |
126 |
3.93 |
100 |
22.08 |
626 |
-- |
-- |
-- |
-- |
4:1/5:1 |
| SLD44411204 |
End Control with Cheek* |
4.96 |
126 |
2.75 |
70 |
15.52 |
440 |
-- |
-- |
-- |
-- |
2:1 |
| SLD444135 |
High Beam Adaptor |
2.51 |
64 |
2.75 |
70 |
3.88 |
110 |
-- |
-- |
-- |
-- |
4:1/5:1 |
*Fasteners not included. 70°sheet angle on genoa car. Max working load for end controls are in line with corresponding
main sheet car or genoa car.
| Description |
Forward End Stop Part # |
Genoa Car Part # |
Aft End Stop Part # |
| Genoa System Pin Stop, Sliding Rods |
SLD44413801 |
SLD44411601 |
SLD44413801 |
|
