Harken spinnaker pole cars feature recirculating ball bearings to permit adjustment under any load. They roll freely on low-profile traveler track to allow crew to adjust for optimal sail shape. Cars with rings for end-for-end jibing come in Small Boat and Midrange sizes. Mid-range and Big Boat cars accept two popular toggle studs and Harken bell end fittings. The H1580 and H784 use an FP333010 toggle.

*CB - Captive Balls

Works on the H784 and H1580 Spin Pole Cars.

If you already have T-track on your mast it is easy to add a line adjustable system with these cars. Add two cam cleats, two cheek blocks and a length of line. Schaefers towable spinnaker pole sliders are made from type 316 stainless steel with a welded ring and  feature large rings to accommodate most plunger and latch type pole ends. The SC1778 towable spinnaker slide fits 1 inch T-track.  The SC1784 fits 1-1/4 inch T-tracks. Both models come with liners for easy adjustment slide on tracks.

The Schaefer SC7338 and SC1787 spinnaker pole sliders are made from type 316 stainless steel with a welded ring. The SC7332 and SC7333 spinnaker pole sliders have Investment cast heavy-duty slide/ring construction. Both types of slide feature large rings to accommodate most plunger and latch type pole ends. The SC7332 and SC7338 slides fit 1 inch T-track.  The SC7333 and SC1787 slides fit 1-1/4 inch T-tracks. SC7338 and SC1787 have slider liners for easy adjustment.

Ronstan fixed spinnaker rings for mast mounting are available in three curved base configurations. They are strong, simple fittings used when height adjustment at the inboard end of the spinnaker pole in not required.  Constructed of grade 304 stainless steel.

Holt Allen fixed spinnaker ring brackets for mast mounting are available in four curved base configurations. HA132 and HA232 are molded from acetal resin and are available in single or twin ring configuration. HA4232 and HA4332 are stainless steel.