Selden's Forked Dinghy Spinnaker Pole End has a lightweight and strong molded composite body with a stainless steel slider and a rounded stainless steel chafe guard to prevent damage to the sheet and guy.
The stainless steel, spring-loaded plunger can be operated at the end fitting or with a release line.
|Tubing Diam. Inboard (in)||0.875|
|Tubing Diam. Outboard (in)||1.00|
Write Your Own Review
- Very Good Review by MZaugg
I am not sure where these are manufactured. Very excellent for small dinghy spinnaker poles, plenty strong and works smoothly. Automotive nylon with stainless plunger and spring so tough and will not corrode. You can spend more but for this size pole, I have not used any that I would say are better.
(Posted on 6/24/2016)
- Cost effective dinghy pole end. Review by John B.
Used to replace all plastic ends that were sticking under load.
Appears to be working well.
When installing, use caution to prevent fasteners from interfering with plunger & spring
(Posted on 4/12/2016)