Custom Made Hiking Straps


Hiking Straps

Two and Three Inch Custom Dinghy Hiking Straps

Custom Sewn and Grommeted Hiking Straps

 

Our riggers create custom sewn or grommeted hiking straps to your exact specifications.  We offer 2" webbing in blue, red or black, and heavy duty 3" webbing in black only.  The standard width is 2" webbing for most stock dinghy hiking straps.  Use the 3" webbing if you would like your strap to better distribute weight to the top of the foot for more hiking comfort.  Download our Hiking Strap Worksheet below to make measuring and ordering easy.

APS Advisor Custom Hiking Strap Measurement Worksheet      

 


 

 Dinghy Hiking Strap Sewn Loop End

Sewn Loop

The webbing is doubled over and sewn in a loop.  Attached the strap by running a line through the sewn loop.

Available for 2" width webbing and 3" width webbing.

Rigging Charge: $5.50 per end

How to Order Rigging


 

Dinghy Hiking Strap Sewn Loop end for 3 inch webbing

Tapered Sewn Loop for 3" Webbing

The webbing is doubled over and sewn in a loop.  The very end of the loop is hand seized inside the loop to gather it and create a taper.  Attached the strap by running a line through the sewn loop.

Available for 3" width webbing only.

Rigging Charge: $6.50 per end

How to Order Rigging


 

 Dinghy Hiking Strap Sewn End Tab

 

Sewn Tab

The webbing is doubled over and sewn down across and diagonally in both directions to create a reinforced tab end termination.  Attached the strap with fasteners directly to your boat.  Be sure to use a 2" mounting plate for 2" webbing, or two 1-1/2" mounting plates for 3" webbing (or at a minimum fasteners with fender washers) to better distribute the weight to the strap.

Available for 2" width webbing and 3" width webbing.

Rigging Charge: $5.50 per end

How to Order Rigging


 

 Dinghy Hiking Strap Single Grommet End

Single Grommet on Sewn Loop

The webbing is doubled over and sewn in a loop for strength.  Then a pressed grommet is added.  This allows you to attached the strap with line run through the grommet.

Available for 2" width webbing and 3" width webbing.

Rigging Charge: $6.50 per end

How to Order Rigging


 

 Hiking Strap sewn patch mid point

Sewn Patch - Double Thickness Mid Point

A second square piece of webbing with heat sealed ends is box and diagonally sewn to a midpoint in the strap.  Attached the strap with fasteners at this mid point directly to your boat.  Be sure to use a 2" mounting plate for 2" webbing, or two 1-1/2" mounting plates for 3" webbing (or at a miinimum fateners with fender washers) to better distribute the weight to the strap.

Available for 2" width webbing and 3" width webbing.

Rigging Charge: $5.50 per mid point

How to Order Rigging


 

 Hiking Strap Double Grommet Mid Point

Double Grommet on Sewn Patch - Double Thickness Mid-Point

A second square piece of webbing with heat sealed ends is box and diagonally sewn to a midpoint in the strap.  Then double pressed grommets are added.  This allows you to attached line to your hiking strap and secure it to your boat midway in its length.  Used mostly on long hiking straps made for multiple people or mutiple sitting positions forward and aft.

Available for 2" width webbing and 3" width webbing.

Rigging Charge: $7.50 per mid point

How to Order Rigging

 

 

 Hiking Strap Single grommet Mid Point

Single Grommet on Sewn Patch - Double Thickness Mid Point

A second square piece of webbing with heat sealed ends is box and diagonally sewn to a midpoint in the strap.  Then a pressed grommet is added.  This allows you to attached line to your hiking strap and secure it to your boat midway in its length.  Used mostly on long hiking straps made for multiple people or multiple sitting positions forward and aft.

Available for 2" width webbing and 3" width webbing.

Rigging Charge: $6.50 per mid point

How to Order Rigging


Please wait...

‚Äč