The upper shroud are 5/32 in 1 x 19 wire with a tapped (1/4-20 thread) aircraft eye or t-ball (depending on your particular mast) for connection to the mast and the lower end has a Johnson open turnbuckle.
- As the upper shroud is captive in the main spreaders, we will need you to send us your spreaders for proper installation.
- We will need you to provide the overall length of the upper shroud that you would like for us to build if your length is not 280 in..
- The measurement should be taken from the bearing surface of the turnbuckle pin to the bearing surface on the t-ball terminal or aircraft eye on your existing diamond stay.
Visit How to Measure Standing Rigging before placing your order.