Forte applies 4-axis continuous fiber braiding over an aluminum mandrel to produce extremely durable and tough carbon fiber tubes. The interlocking fiber braid is wet-out with epoxy resin. The end result is a seamless braided tube with very precise compression or bending characteristics.
Forte builds its parts to specific lengths and weights, and may be straight gauge or tapered. The FCT (Forte Carbon Tube) 200 requires a BU150-200 bushing and has an outside diameter of 2 1/4 in. (57mm), an inner diameter of 2 in. (51mm), and a maximum length of 11'6 in..
J/22 and cruising sailors create spinnaker poles out of these tubes by using Ronstan RFPNP166 and RFPNP167 end fittings and bushings.
|Inside Diameter (in)||2|