Holt Allen's Small Halyard Rack is made of anodized aluminum and has five teeth. Swage a long loop onto the end of your wire halyard and attach a strong 1/8 in. (3mm) or smaller messenger line to use to pull the halyard and loop down and out of the mast under load so that it can be hooked to a tooth on the rack, to set the desired tension.
The track is mounted on the side of the mast. This 5-tooth model is approximately 3 21/64 in. (85mm) long.
|Hole Sizing (in)||5/32|
|Hole Sizing (mm)||4|
|Max Wire Size (mm)||5|
|Note||No. of adjustments: 5|