Harken Reflex Furlers

The Harken Reflex furling system for asymmetric spinnakers is used for handling free-flying downwind and reaching sails. These sails have a loose positive luff that is longer than the leech and are asymmetric spinnakers, cruising spinnakers, or gennakers. The furling system is also for code zero straight-luffed sails. Attachment methods vary according to sail type.

 

This system is a new and simplified approach to downwind and off wind sail control! The past generation of free-flying sail furlers often resulted in partial or uneven furling. Reflex furlers provide sailors confidence that their free-flying gennakers, spinnakers, and code sails will furl with quickly and in a controlled way. The result? Sailors use downwind sails more often—especially when sailing shorthanded. The compact drive unit is easier to handle than other designs. Pull the furling line and the drive unit reacts reflexively to rotate the torsion cable, immediately transferring torque to the head swivel without unwanted corkscrewing delaying the response. The head swivel reacts instantly, spinning the sail smoothly and completely from top to bottom for an even roll-up and super-tight wrap. The furled spinnaker lowers easily to the deck, ready for the next hoist.  Unit 1 is rated at 1.5T MWL for boats to 11 m (36'). Unit 2 is rated at 2.5T MWL for boats up to 14 m (45').


 APS Advisor Expert Advice Reflex Furler Installation Manual   APS Advisor Expert Advice Reflex Furler Product Deatils   APS Advisor Expert Advice Reflex Furler Ordering Tips and Details

per page

Items 1-16 of 25

Set Ascending Direction
per page

Items 1-16 of 25

Set Ascending Direction

Please wait...