Schaefer Dinghy Rudder Fittings

Rudder hardware. These Schaefer light duty pintles and gudgeons are ideal for use on most prams, dinghies and small centerboard boats twelve feet and under.  (L) stands for Long pins used in lower fittings -- (S) stands for Short pins use in upper fittings.  Constructed with grade 316 stainless steel with fully welded, tapered tip pins. Available for 1/2 inch and 3/4 inch thick rudders. Two pin lengths help in getting the rudder aligned and set.  Strap stock is 1/16 inch thick.

Part No. Use/Type # Holes Inside Width Inside Length Pin/Hole Diameter
in mm in mm in mm
SC8101 Gudgeon 2 - - - - 5/16 8
SC8001 Pintle L 2 1/2 13 3 76 5/16 x -1/2 8 x 13
SC8002 Pintle S 2 1/2 13 3 76 5/16x 1-1/4 8 x 32
SC8011 Pintle L 2 3/4 19 3 76 5/16 x 1-1/2 8 x 38
SC8012 Pintle S 2 3/4 19 3 76 5/16 x 1-1/4 8 x 32
per page

5 Item(s)

Set Ascending Direction
  • Schaefer Pintle Upper Dinghy 5/16" Pin 3/4" W

    Schaefer Pintle Upper Dinghy 5/16" Pin 3/4" W

    $32.67

    $38.44

    15% OFF

  • Schaefer Pintle Lower Dinghy 5/16" Pin 3/4" W

    Schaefer Pintle Lower Dinghy 5/16" Pin 3/4" W

    $32.64

    $38.40

    15% OFF

  • Schaefer Gudgeon Dinghy 5/16 Hole

    Schaefer Gudgeon Dinghy 5/16 Hole

    $9.82

    $11.55

    15% OFF

  • Schaefer Pintle Upper Dinghy 5/16" Pin 1/2" W

    Schaefer Pintle Upper Dinghy 5/16" Pin 1/2" W

    $31.62

    $37.20

    15% OFF

  • Schaefer Pintle Lower Dinghy 5/16" Pin 1/2" W

    Schaefer Pintle Lower Dinghy 5/16" Pin 1/2" W

    $31.78

    $37.39

    15% OFF

per page

5 Item(s)

Set Ascending Direction

Please wait...