Schaefer Small Keelboat Rudder Fittings

Rudder hardware. These Schaefer medium duty pintles and gudgeons are ideal for use on small keelboats under twenty feet.   (L) stands for Long pins used in lower fittings -- (S) stands for Short pins use in upper fittings.  Constructed with grade 316 stainless steel with fully welded, tapered tip pins. Available for 1 inch and 1-1/2 inch thick rudders. Two pin lengths help in getting the rudder aligned and set.  Strap stock is 1/8 inch thick.

Part No. Use/Type # Holes Inside Width Inside Length Pin/Hole Diameter
in mm in mm in mm
SC8141 Gudgeon w/Bush 2 - - - - 1/2 13
SC8143 STD Gudgeon 2 - - - - 1/2 13
SC8146 HD Gudgeon 2 - - - - 1/2 13
SC8045 Pintle L 4 1 25 7 178 1/2 x 2-3/4 13 x 70
SC8046 Pintle S 2 1 25 3-3/8 86 1/2 x 1-3/4 13 x 45
SC8055 Pintle L 4 1-1/2 38 7 178 1/2 x 2-3/4 13 x 70
SC8056 Pintle S 2 1-1/2 38 3-3/8 86 1/2 x 1-3/4 13 x 45
per page

5 Item(s)

Set Ascending Direction
per page

5 Item(s)

Set Ascending Direction

Please wait...