The Unit 1 Reflex Top Down Furler is rated at 1.5T MWL for boats to 11 m (36') and available in three cable lengths.
This system is a new and simplified approach to downwind and off wind sail control! The past generation of free-flying sail furlers often resulted in partial or uneven furling. Reflex furlers provide sailors confidence that their free-flying gennakers, spinnakers, and code sails will furl with quickly and in a controlled way. The result? Sailors use downwind sails more often—especially when sailing shorthanded. The compact drive unit is easier to handle than other designs. Pull the furling line and the drive unit reacts reflexively to rotate the torsion cable, immediately transferring torque to the head swivel without unwanted corkscrewing delaying the response. The head swivel reacts instantly, spinning the sail smoothly and completely from top to bottom for an even roll-up and super-tight wrap. The furled spinnaker lowers easily to the deck, ready for the next hoist.
The Reflex cable is more torsionally resistant to corkscrewing than the current breed of textile cable. Braided stainless steel wire filaments over braided polyester core transmit torque to head swivel through both tension and compression for faster furling (textile cable transmits through tension only).
The quick-release modular T-fitting allows a single drive unit to handle multiple sails.
Asymmetric Spinnaker - maximum sail area 112 m (1200ft) squared.
- Head swivel and soft cover
- Reflex torsion cable
- Lower drive drum unit
- Reflex tack swivel terminal
- Snap shackle threaded adapter
- 2 cable clamps
|Boat Length (Ft)||25-36|
|Boat Length (M)||7.5-11|
|Drum Diameter (mm)||140|
|Drum Height (mm)||54|
|Maximum Sail Area (sq ft)||1200|
|Max Sail Area (Sq. M)||112|
Am sure all good, a bit disappointed in items above..
- Torsion cable