We offer J80 Shrouds in type 316, 1x19 wire with open body turnbuckles and T-balls on the mast side. 5/32 in wire with 1/4 in pin.
Note: If your boat is not US built, please check that the turnbuckle clevis pin sizes are correct for your chain plates.
To produce a new shroud, we would ask you to provide us the length of your existing rigging at normal sailing setting (medium air) from bearing surface of the T-ball to the bearing surface of the toggle plate at the bottom of the turnbuckle.
This can be done in two ways:
- You can ship us your existing shroud for our rigging department to duplicate.
- You can measure your own rigging and we will work from the measurements that you provide us.
Please visit our page on How To Measure Standing Rigging before placing your order.
Feel free to give our Customer Service guys a call with any questions at 800.729.9767.