Laser Boom, Outhaul and Fittings Diagram

To view the description for an individual product in this group, please click on the "Quick View" option below.

Complete Boom and Boom Fittings Diagram

Availability: In stock

NO Item NO Product Name Price Qty
1 LP89407 Boom, Complete - Laser New Blocks
Quick View > View Less > Stock Status: In Stock
Laser Boom - Complete with New Blocks LP89407

The one and only Boom you will need for whichever Laser model you choose - Standard, Radial or 4.7.

This Laser Boom Assembly has a sturdy construction of extruded aluminum and comes to you fully rigged with all necessary hardware installed.

Due to the overall dimensions of this product, our carriers have classified it as "oversized". Please click here for additional information.

More Information >

APS Price $330.00

1 NATMUP155 Nautos Recreational Laser Boom, Complete - Standard Blocks
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
MUP155-laser-boom-upgraded-mup15-5-training-1.jpg

The one and only Boom you will need for whichever Laser model you choose - Standard, Radial or 4.7.

This Laser Boom Assembly has a sturdy construction of extruded aluminum and comes to you fully rigged with all necessary hardware installed.

Due to the overall dimensions of this product, our carriers have classified it as "oversized". Please click here for additional information.

Use as a direct replacement for LP89407 Laser Boom, Complete - New Blocks.

More Information >

APS Price $157.00

2 C211MK1AN Clamcleat MK1 Racing Junior - Anodized
Quick View > View Less > Stock Status: In Stock
Clamcleat MK1 Racing Junior - Anodized C211Mk1AN

Clamcleats are made of a very strong alloy. Available in silver or hard anodized finish. The silver finish is silver stone enamel that is cost effective and high quality. The anodized finish is a hard finish that gives it more durability. Accessories are available for each type of clamcleat and are specific to the cleat. The keeper prevents unwanted cleating or uncleating and hold line under no load/upside down mounting situations. The tapered pad allows correct line/cleating alignment and the fairlead guides the line into the cleat.

Info:

  • Accepts: 3-6mm line
  • Hole Spacing: 66mm
  • Bolts/Rivets: M5
  • Screws: 4.8mm
More Information >

APS Price $13.82

3 H2698 Harken T18 Soft-Attach Block
Quick View > View Less > Stock Status: In Stock

Tie, splice or lash Harken's T18 Soft Attach Block anywhere lightweight blocks are required and nothing else fits. They are ideal for use on control lines and take-ups on dinghies, skiffs and beach cats; especially on downhauls and outhauls.

The sheave spins on stainless steel ball bearings in a captive grooved race for an optimal strength to weight ratio. Maintenance is simple with no lubricant needed, because the blocks flush clean with fresh water.

A 1/16 inch (1.8mm) line is included.

More Information >

List Price $20.20

APS Price $18.99

3 H404 Harken 16mm Single Block
Quick View > View Less > Stock Status: In Stock
Harken AirBlock - 16mm, Single H404

Harken's smallest AirBlock, the 16mm is perfect for small synthetic control lines found on high-tech dinghies.

The patented bearing system uses stainless steel balls in a captive, grooved race. The safe working load of 250lbs is the highest on the market for similarly sized blocks.

It is great for dinghy control lines, big boat leech lines, downhauls, traveler controls, spinnaker pole trip lines, outhauls, cunninghams, and halyards on prams. For instance, Snipes use one in the jib downhaul system.

This block has an O-ring, which keeps the line on the sheave during intermittent loading.

More Information >

List Price $14.75

APS Price $12.99

4 APS009 APS Laser Soft Boom Eyestrap Kit
Quick View > View Less > Stock Status: In Stock
APS Laser Soft Boom Eyestrap Kit APS009

Class rules let you replace the stock stainless steel lacing eyestrap in the middle of your boom with a soft strap. For easiest replacement of an existing eyestrap, we recommend using this APS Soft Boom Eyestrap Kit versus the Lacing Eyestrap Kit requires you to remove hardware for installation.

This kit contains stainless steel pop rivets, washers, soft strapping and instructions. Just drill out the pop rivets on your old eyestrap and pop rivet ours in place using the same holes.

Click HERE for Installation instructions.

More Information >

APS Price $3.95

4 LP90668 Laser Lacing Eyestrap Kit - Webbing
Quick View > View Less > Stock Status: In Stock
Laser Lacing Eyestrap Kit - Webbing LP90668

This Laser Lacing Eyestrap Kit comes standard on 2011 or newer Lasers.

It is a continuous loop webbing of webbing that will require removal of boom blocks for installation.

Includes washer and rivet needed for attachment.

More Information >

APS Price $9.00

4 LP91020 Laser Lacing Eyestrap Kit - Stainless
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Laser Lacing Eyestrap Kit - Stainless LP91020

This stainless steel Laser Lacing Eyestrap Kit comes with strap and rivets needed for installation. Used to create a lacing for your mainsheet on the Laser boom.

More Information >

APS Price $10.00

5 H405 Harken 16mm Single w/Bec
Quick View > View Less > Stock Status: In Stock

Harken's smallest block, the 16mm AirBlocks are perfect for small synthetic control lines found on high-tech dinghies, but can also be found on big boat leech lines, downhauls, traveler controls, spinnaker pole trip lines, outhauls, cunninghams and pram halyards.

The patented bearing system uses stainless steel balls in a captive, grooved race. The safe working load of 250lbs is the highest on the market for similarly sized blocks.

More Information >

List Price $16.85

APS Price $14.99

6 LP91449 Harken Laser Forward Boom Block
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Harken Laser Forward Boom Block LP91449

Harken Laser Forward Boom Block from Laser Performance.

Laser Performance has brought us a great Harken upgrade with these Laser blocks. The boom blocks and upper traveler block feature ball bearings- allowing for faster mainsheet eases around the top mark.

In order to install the boom blocks, you will need to remove both eye straps holding your current blocks on by drilling out the rivets. When reinstalling the eye straps, they may either be riveted back in place - or to make installation a breeze; check out the APS Throughbolt Kit.

More Information >

APS Price $30.61

6 NAT91109 Nautos Recreational Laser Forward Boom Block
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
91109-plastic-block-laser.jpg

The Laser Forward Boom Block from Nautos.

Nautos brings you a more affordable alternative plastic composite block for your laser boom. The boom blocks and upper traveler block feature ball bearings- allowing for faster mainsheet eases around the top mark.

In order to install the boom blocks, you will need to remove both eye straps holding your current blocks on by drilling out the rivets. When reinstalling the eye straps, they may either be riveted back in place - or to make installation a breeze; check out the APS Throughbolt Kit.

Similar to LP91449 Harken Laser Forward Boom Block.

Key Features:

  • Working Load 200 lbs
  • Max Line 3/8"
  • Sheave 40 mm ball bearing
More Information >

APS Price $7.99

6 NAT91109R Nautos Recreational Laser Forward Boom Block w/ BB Sheave
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
91109r-plastic-composite-block-with-ball-bearings-laser-1_.jpg

The Laser Forward Boom Block from Nautos.

Nautos brings you a more affordable alternative plastic composite block for your laser boom. The boom blocks and upper traveler block feature ball bearings- allowing for faster mainsheet eases around the top mark.

In order to install the boom blocks, you will need to remove both eye straps holding your current blocks on by drilling out the rivets. When reinstalling the eye straps, they may either be riveted back in place - or to make installation a breeze; check out the APS Throughbolt Kit.

Similar to LP91449 Harken Laser Forward Boom Block.

Key Features:

  • Working Load 200 lbs
  • Max Line 3/8"
  • Sheave 40 mm ball bearing
More Information >

APS Price $14.01

7 HA4088 Allen Laser Boom Eyestrap
Quick View > View Less > Stock Status: In Stock
Allen Laser Boom Eyestrap HA4088

This Allen stainless steel eyestrap is used as an attachment point for Laser mainsheet boom blocks.

Made of pressed stainless steel. Uses factory specified hole spacing and fastener sizes.

More Information >

APS Price $3.53

7 LP91537 Laser Eyestrap - Mainsheet Boom Blocks
Quick View > View Less > Stock Status: In Stock
Laser Eyestrap - Mainsheet Boom Blocks LP91537

This eyestrap is an exact replacement for broken or worn out eyestraps on Laser booms.

Requires two 3/16" rivets for installation or an APS Throughbolt Kit for an even more secure attachment.

More Information >

APS Price $5.00

8 EX2005 Optiparts Laser Clew Strap
Quick View > View Less > Stock Status: In Stock
Optiparts Laser Clew Strap EX2005

This WinDesign Laser Clew Strap has Velcro on both sides and metal hook for securing. The 25mm wide Velcro strap provides enough contact area that the strap will not come undone.

A piece of sturdy, boom friendly, material is sewn on the back to reduce friction between the webbing and boom. The strap is easy to attach and will still slide easily along the boom.

More Information >

APS Price $19.10

8 H394 Harken Clew Hook with Airblock - Laser
Quick View > View Less > Stock Status: In Stock
Harken Clew Hook with Airblock - Laser H394

This Harken Clew Hook and Block system is designed for Lasers and other loose-footed dinghies. It installs permanently on the boom and allows you to easily attach and adjust your sail in high wind and waves.

This set up comes with the clew hook and 16mm AirBlock, already connected.

Works well with the updated Laser clew system. Just run the outhaul line and tie the clew tie-down as usual.

More Information >

List Price $31.80

APS Price $28.99

8 LP83055 Laser® Clew Sleeve
Quick View > View Less > Stock Status: In Stock
Laser Clew Sleeve LP83055

Now approved for use on the Laser (after the 2006 amendment to Rule 3(g) of the Laser Class Rules), the Laser Clew Sleeve is an all-in-one solution to rigging your outhaul and clew tie-down.

Produced by Harken for Laser Performance, the combination of a low friction metal sleeve and a ball bearing block facilitates easy outhaul adjustment, especially in light air.

Extensive development went into this particular design, and the hook is designed to not allow unwanted release of the sail while still allowing quick release during rigging and de-rigging. As you can see, the sail is held quite close to the boom, but should not produce any noticeable wear on the surface of your boom.

This sleeve can prove particularly useful for 4.7 and Radial sailors where quick adjustments of the outhaul can be the difference between staying upright or getting wet!

More Information >

APS Price $55.00

8 RST017 Rooster Laser® Clew Strap
Quick View > View Less > Stock Status: In Stock
Rooster Laser Clew Strap RST017

The Rooster Laser Clew Strap is easy to attach, won't loosen, and it will still slide nicely along the boom.

One end of the strap has the soft velcro on both sides. It then sandwiches between the hard velcro, providing so much contact area that the strap will not slip.

More Information >

APS Price $19.95

9 HA2021HK 20mm Block w/Hook
Quick View > View Less > Stock Status: In Stock
20mm Block w/Hook HA2021HK

This Holt Allen 20 mm Dynamic Micro Block with Hook has dynamic ball bearings and line-friendly contours and articulation.

This line of blocks are built to handle maximum loads and are designed to accommodate control lines through lead blocks, vang cascades, cunningham systems, halyard leads, and other tight spots.

Has stainless steel cheeks and feature a central hole that can be used for a tie-on becket, which makes them ideal for Laser cunningham and vang systems.

More Information >

APS Price $33.15

10 LP91308 Laser Boom and Traveler Fairlead - Blue
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Laser Boom and Traveler Fairlead - Blue LP91308

This Laser Performance plastic fairlead has two common uses on your Laser. It can function on the boom as the outhaul fairlead, or can be attached to the deck as a traveler fairlead.

Fairlead has 23mm hole spacing, which will fit Laser hulls newer than 2004.

More Information >

APS Price $5.00

10 NAT91107 Nautos Recreational Laser Traveler Fairlead
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
NAT91107-Plastic-Nautos-Fairlead

This Laser Performance plastic fairlead has two common uses on your Laser. It can function on the boom as the outhaul fairlead, or can be attached to the deck as a traveler fairlead.

Fairlead has 23mm hole spacing, which will fit Laser hulls newer than 2004.

Key Features:

  • Bore 7/16"
  • Center to center mounting holes 31/32"
  • Height 43/64"
  • Length 1 5/8"
  • Width 9/16"

Use as a direct replacement for LP91308 Laser Boon and Traveler Fairlead, Blue.

More Information >

APS Price $2.15

11 LP90660 End Plug Kit
Quick View > View Less > Stock Status: In Stock
End Plug Kit

An End Plug Kit for Lasers is used as the cap for the top of its upper mast section and for the clew end of the boom.

Kit includes 1 plastic end plug, and 1 rivet. Our suggestion is to replace both the fairlead and the End Plug at the same time. If not, rotate your existing end plug and drill a new hole for the rivet to ensure a tight and secure mounting of the outhaul fairlead.

More Information >

APS Price $11.00

11 NAT91100 Nautos Recreational Laser End Plug Kit
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
91100-top-boom-cap-laser-set-of-2-pieces-1.jpg

The Nautos Recreational Laser End Plug Kit is used as the cap for the top of its upper mast section and for the clew end of the boom.

Kit includes 1 plastic end plug, and 1 rivet. Our suggestion is to replace both the fairlead and the End Plug at the same time. If not, rotate your existing end plug and drill a new hole for the rivet to ensure a tight and secure mounting of the outhaul fairlead.

Similar to LP90660 Laser End Plug Kit but without the rivets.

More Information >

APS Price $3.20

12 LP91450 Harken Laser Aft Boom Block with Becket
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Harken Laser Aft Boom Block with Becket LP91450

Harken Laser Aft Boom Block with Becket from Laser Performance.

Laser Performance has brought us a great Harken upgrade with these Laser blocks. The boom blocks and upper traveler block feature ball bearings - allowing for faster mainsheet eases around the top mark.

In order to install the boom blocks, you will need to remove both eye straps holding your current blocks on by drilling out the rivets. When reinstalling the eye straps, they may either be riveted back in place - or to make installation a breeze, check out the APS Throughbolt Kit.

More Information >

APS Price $38.25

12 NAT91110 Nautos Recreational Laser Aft Boom Block w/ Becket, Gray
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
NAT91110-Nautos Recreational Laser Aft Boom Block w Becket, Gray

Laser Aft Boom Block with Becket from Nautos.

The boom block or upper traveler block allows for fast mainsheet eases around the top mark.

In order to install the boom blocks, you will need to remove both eye straps holding your current blocks on by drilling out the rivets. When reinstalling the eye straps, they may either be riveted back in place - or to make installation a breeze, check out the APS Throughbolt Kit.

Working Load 200 lbs. Sheave Diameter 40mm.

Similar to LP91450 Harken Laser Aft Boom Block with Becket.

More Information >

APS Price $7.51

12 NAT91110R Nautos Recreation Laser Aft Boom Block w/ Becket & BB Sheave
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
NAT91110R-Nautos Recreation Laser Aft Boom Block with Becket & BB Sheav

Laser Aft Boom Block with Becket and Ball Bearing Sheave from Nautos.

The boom blocks or upper traveler block features ball bearings - allowing for faster mainsheet eases around the top mark.

In order to install the boom blocks, you will need to remove both eye straps holding your current blocks on by drilling out the rivets. When reinstalling the eye straps, they may either be riveted back in place - or to make installation a breeze, check out the APS Throughbolt Kit.

Similar to LP91450 Harken Laser Aft Boom Block with Becket.

Key Features:

  • Working Load 200 lbs
  • Max Line 3/8"
  • Sheave 40 mm ball bearing
More Information >

APS Price $14.01

12 NAT91627 Nautos Recreational Laser Plastic Aft Boom Block w/ Becket
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
91627-a-Laser-aft-boom-block-with-becket.jpg

Laser Plastic Block with Becket from Nautos.

The plastic boom block or upper traveler block allows for fast mainsheet eases around the top mark.

In order to install the boom blocks, you will need to remove both eye straps holding your current blocks on by drilling out the rivets. When reinstalling the eye straps, they may either be riveted back in place - or to make installation a breeze, check out the APS Throughbolt Kit.

Similar to LP91450 Harken Laser Aft Boom Block with Becket.

Key Features:

  • Working Load 200 lbs
  • Sheave 40 mm ball bearing
More Information >

APS Price $8.27

13 LP90645 Laser Vang Strap Kit
Quick View > View Less > Stock Status: In Stock
Laser Vang Strap Kit LP90645

The Laser Vang Strap Kit attaches to the forward section of the boom to provide an attachment point for the boom vang key.

Strap is made of stainless steel. Kit includes the four rivets needed for installation.

More Information >

APS Price $16.00

14 LP90650 Laser Gooseneck Plug Kit
Quick View > View Less > Stock Status: In Stock
Laser Gooseneck Plug Kit LP90650

This Laser Gooseneck Plug slips into the forward end of a Laser boom to provide mating point for the mast's gooseneck assembly.

Constructed of plastic and comes with two rivets needed for installation.

More Information >

APS Price $12.00

14 NAT91105 Nautos Recreational Laser Gooseneck Plug Kit
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
91105-goose-neck-boom-cup-2-pieces-set-1.jpg

This Nautos Recreational Laser Gooseneck Plug slips into the forward end of a Laser boom to provide a mating point for the mast's gooseneck assembly. Durable plastic construction.

Use as a direct replacement for LP90650 Laser Gooseneck Plug Kit. Rivets sold separately.

More Information >

APS Price $6.91

15 LP91188 #54 Rivets for Laser - Aluminum (10 pack)
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
#54 Rivets for Laser - Aluminum (10) LP91188

Set of ten #54 aluminum rivets for attaching a boom sleeve or fairleads to a Laser boom.

More Information >

APS Price $6.00

15 LP91189 #64 Rivets for Laser - Stainless (10 pack)
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
#64 Rivets for Laser - Stainless (10) LP91189

Set of ten #64 stainless steel rivets. Perfect for most general hardware on a Laser.

More Information >

APS Price $7.00

16 LP90418 Laser Boom Sleeve Reinforcement Kit
Quick View > View Less > Stock Status: In Stock
Laser Boom Sleeve Reinforcement Kit LP90418

Laser Boom Sleeve Reinforcement Kit by Laser Performance.

As fun as upgrades may be, an upgraded vang assembly can add substantial pressure on a boom causing it to bend significantly. However, if you have recently purchased an upgraded vang, fear not my friend! For protection against this kind of damage, Laser Performance offers this Laser Boom Sleeve Reinforcement Kit

The 35.5" aluminum sleeve included with this kit will slide inside the boom and is then simply riveted into place for the added support your boom needs when you just can't ease that vang fast enough in breeze.

Kit includes a long aluminum sleeve, a new gooseneck plug fitting and 2 rivets needed for installation.

More Information >

APS Price $34.00

Please wait...