Laser Cockpit and Deck Fittings Diagram

To view the description for an individual product in this group, please click on the "Quick View" option below.

Laser Cockpit Fittings - Grab Rail, Mainsheet & Hiking Strap Laser Cockpit Fittings - Grab Rail, Mainsheet & Hiking Strap

Availability: In stock

NO Item NO Product Name Price Qty
1 H2135 Harken 57mm Carbo Ratchet Single
Quick View > View Less > Stock Status: In Stock

Hand-hold your loaded lines and experience controlled releasing with Harkens 57mm Carbo Ratchet Blocks.

Their machined aluminum sheaves have eight facets to hold line securely with 10:1 advantage when the block is ratcheting. Recessed switch allows on/off control for the ratcheting mechanism.

These blocks are primarily used for main, jib and spinnaker sheets, traveler controls and foreguys. Sheave diameter is 2 1/4 in (57mm).

The load ratings for blocks with cams are based on the cams strength.

Note: For the ultimate mainsheet system, mount a switchable ratchet in the cockpit and a Ratchamatic on the boom to allow double holding power in heavy air and to ensure the mainsheet runs out freely in light air.

More Information >

APS Price $65.99

1 H2625 Harken 57mm Carbo Ratchamatic Single
Quick View > View Less > Stock Status: In Stock
57mm Carbo Ratchamatic Single H2625

The Carbo Ratchamatic is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase. When changing gears, the over-center shifting between ratchet and light air modes is crisp and seamless.

Unloaded main and jib sheets run out like greased lightning during mark roundings. Asymmetrical spinnakers that require the tough holding power of a ratchet, also free instantly to give you perfect, effortless jibes.

Moreover, how about this terrific feature - with the simple twist of an Allen wrench you can adjust ratchet engagement to a higher or lower load to suit your own muscle power or sailing style.

Great for main and jib sheets; also asymmetric spinnakers. 57mm sheave, 3/8 in maximum line size.

More Information >

List Price $102.70

APS Price $92.99

1 RF56100 Ronstan 55mm Orbit Ratchet: Single w/Swivel Head
Quick View > View Less > Stock Status: In Stock
55mm Orbit Ratchet: Single w/Swivel Head RF56100

This Series 55 Ratchet Orbit single block is the only one in its class that gives you auto and manual engagement modes. It provides up to 21:1 holding power and enables you to release sheets smoothly. That's nearly double the holding power of its nearest competitor.

The sheave has twelve, rather than eight, gripping faces, which distribute the load and minimize rope wear. Use it for mainsheet and spinnaker sheet systems on dinghies, sportboats, and small keelboats; halyard, vang, and backstay applications on boats up to 26' (8m); and control line applications on larger yachts.

Make sure you have a standard Dee shackle with a slotted pin of 5/32 in diameter for attachment.

More Information >

List Price $90.53

APS Price $76.95

1 SLD40630101 Selden 60mm Ratchet Block
Quick View > View Less > Stock Status: In Stock
Selden has been manufacturing masts and hardware for over half a century. Its 60mm Manual Ratchet Block has a blue on/off switch and is very versatile. It features Delrin ball bearing and a reinforced Polyetherimide sheave. The block is ideal for dinghy mainsheets.
More Information >

APS Price $66.30

2 H072 Harken D Shackle 3/16 Pin
Quick View > View Less > Stock Status: In Stock
D Shackle 3/16 Pin H072

Harken Stamped D Shackles are used on most of the Harken small boat blocks. They are also useful for a wide range of other applications. Polished to a high luster.

More Information >

List Price $4.50

APS Price $3.99

3 H071 Harken Standard Stand Up-Spring
Quick View > View Less > Stock Status: In Stock

Prevent your blocks from laying down on the job. This Small Stand-Up Spring by Harken will help keep blocks upright, which improves the lead angle and keeps blocks from hitting the deck.

This non-tapered spring can be used for 40 - 60mm loop top or swivel post blocks.

More Information >

List Price $1.15

APS Price $0.99

4 LP85236 Laser & Sunfish Daggerboard Stop Set
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Laser & Sunfish Daggerboard Stop Set LP85236

This rubber Daggerboard Stop Set is used to prevent a Laser or Sunfish daggerboard from going too far into the well.

The stopper comes as two pieces - use a rubber mallet to tap them together for a secure connection.

More Information >

APS Price $11.00

4 HT7020 Holt Laser Centerboard Stop Set Recreational
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
holt centerboard stop set recreational

Holt Centerboard Stop Set for a Laser or Sunfish. Not class legal. This set is used to prevent the daggerboard for going too far into the well.

Alternative part to LP85236. The stopper comes in three pieces – use a rubber mallet to tap the end pieces to the center piece for a secure fit.

More Information >

APS Price $9.95

4 NAT9936 Nautos Recreational Laser Daggerboard Stop Set
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
9936-b-Laser-Training-Daggerboard.jpg

This rubber Daggerboard Stop Set is used to prevent a Laser or Sunfish daggerboard from going too far into the well.

The stopper comes as two pieces - use a rubber mallet to tap them together for a secure connection.

Use as a direct replacement for HT7020 Holt Centerboard Stop Set Recreational

More Information >

APS Price $10.34

5 EX2055 Optiparts Recreational Laser Daggerboard
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Optiparts Recreational Laser Daggerboard EX2055

This Optiparts Recreational Laser Daggerboard is a great option for training use or just-for-fun-sailing.

Made of a wood core with fiberglass laminate and white gelcoat. NOT class legal.

More Information >

APS Price $397.80

5 LP85030 Laser GRP Daggerboard - with Stopper
Quick View > View Less > Stock Status: In Stock

Complete Laser GRP Daggerboard with rubber stopper.

With the most sophisticated composite manufacturing process available, Laser Performance brings you the Laser GRP Daggerboard that offers increased performance and durability over the previous versions.

GRP blades are composed of structural fiberglass skins with a polyurethane high-density closed cell foam cores. What does that mean for you? It means a smooth sleek finish, and a longer lasting product that won't warp in the heat or easily acquire shark attack like markings on the tailing edges or tips.

GRP Laser foils are class legal. Daggerboard stopper included. These daggerboards are significantly more durable than previous generations but since their not made of solid Carbyne, care and repair instructions are included.

Due to the overall dimensions of this product, our carriers have classified it as "oversized". Please click here for additional information.

More Information >

APS Price $485.00

5 NATHT7006 Nautos Recreational Laser GRP Daggerboard Complete w/Stop
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
ht7006-daggerboard-with-stop-set-for-laser-sailboat-1.jpg

Complete Laser GRP Daggerboard with rubber stopper.

With the most sophisticated composite manufacturing process available, Laser Performance brings you the Laser GRP Daggerboard that offers increased performance and durability over the previous versions.

GRP blades are composed of structural fiberglass skins with a polyurethane high-density closed cell foam cores. What does that mean for you? It means a smooth sleek finish, and a longer lasting product that won't warp in the heat or easily acquire shark attack like markings on the tailing edges or tips.

GRP Laser foils are class legal. Daggerboard stopper included. These daggerboards are significantly more durable than previous generations but since their not made of solid Carbyne, care and repair instructions are included.

Due to the overall dimensions of this product, our carriers have classified it as "oversized". Please click here for additional information.

Use as direct replacement for LP85030 Laser GRP Daggerboard - With Stopper

More Information >

APS Price $432.40

6 LP85239 Laser Daggerboard Brake - Rubber W
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Laser Daggerboard Brake - Rubber W LP85239

This Daggerboard Friction Pad (also known as "V" Brake, or "W" Break, whichever you prefer) is the original MK1 flat back, rubber friction pad that works to apply sufficient pressure to the back of the daggerboard to hold it up or down.

The Friction Pad is held in place with a plastic plate, part number LP91168.

More Information >

APS Price $7.00

6 LP91538 Laser Daggerboard Friction Pad Mk2
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Laser Daggerboard Friction Pad Mk2 LP91538

When focusing on tactics beating upwind the last thing you want to do is constantly check that your daggerboard isn't popping up. The Laser Daggerboard Friction Pad, MKII holds your board in place, so you don't have to. Engineered by Laser Performance, this friction pad is a must have upgrade for your Laser.

The MkII friction pad allows you to adjust the friction on your daggerboard - just slide the pad fore and aft to increase/decrease the friction on your board. The MkII's innovative design and materials make it longer lasting and more effective than the old W-shaped friction pad Laser sailors are used to.

New fasteners are included with this item and the hole spacing of this second generation friction pad match up with that of the first generation -- no new holes.

More Information >

APS Price $19.00

6 EX2004 Laser Daggerboard Friction Plate: Not Class Legal
Quick View > View Less > Stock Status: In Stock
Laser Daggerboard Friction Plate: Not Class Legal
Laser Daggerboard Friction Plate by Windesign Sailing. Not class legal.
More Information >

APS Price $5.60

6 NAT2079 Nautos Recreational Laser Daggerboard Brake - Rubber W
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
2079-friction-pad-2-pieces-set-1.jpg

This Daggerboard Friction Pad (also known as "V" Brake, or "W" Break, whichever you prefer) is the original MK1 flat back, rubber friction pad that works to apply sufficient pressure to the back of the daggerboard to hold it up or down.

The Friction Pad is held in place with a plastic plate

Use as a direct replacement for LP85239

More Information >

APS Price $3.09

7 H073 Harken Eyestrap - Medium
Quick View > View Less > Stock Status: In Stock

Harken Eyestraps are by far our most popular sellers. They are economical and adaptable enough to work in many applications, which makes it a useful multipurpose hardware item to have on hand.

Use them for light-duty mounting bases for blocks, lashing points, and fairleads.

Tip: Eyestraps are a good item to have few extra of in your toolbox.

More Information >

List Price $2.25

APS Price $1.99

7 LP91100 Eye Strap, Two Hole (Laser/C420/Sunfish)
Quick View > View Less > Stock Status: In Stock
Eye Strap, Two Hole (Laser/C420/Sunfish) LP91100

This flat edged, two holed eyestrap works great for many places on your Laser, 420, or Sunfish. Especially suited for the inside of your cockpit to secure hiking straps.

Accepts 2 #10 x 1/2 in screws (not included).

More Information >

APS Price $3.00

8 EX1453 Mounting plates for hike strap
Quick View > View Less > Stock Status: In Stock

Stainless steel plate with two holes for mounting hiking strap and buoyancy bag with strap webbing.

More Information >

APS Price $2.20

8 LP91168 Laser Anchor Plate - C/B Brake/Hiking Strap
Quick View > View Less > Stock Status: In Stock
Laser Anchor Plate - C/B Brake/Hiking Strap LP91168

This Laser Performance plastic plate is a durable and lightweight piece meant to sandwich down the forward attachment of your Laser's hiking strap.

Plate also works well to secure the rubber “w” dagger board brake that fastens to the trailing edge of the dagger board trunk.

More Information >

APS Price $4.00

9 H468 Harken Micro Cam-Matic ll Aluminum Cam Cleat
Quick View > View Less > Stock Status: In Stock
Harken Micro Cam-Matic ll Aluminum Cam Cleat H468
You can't call yourself a sailor if you haven't laid eyes on or trimmed a sheet through Harken's Cam-Matic. It's the original ball bearing cam cleat and is still the most popular cleat in world.ᅠ We're proud to remind you that this world-renowned product is made in the U.S.A. Harken's Micro Cam-Matic cleats hold lines securely and release instantly for easy, precise trimming. They are hardcoat-anodized for high-load, high-wear, continuous adjustment applications and accept minimum line diameter of 3/32 in (2mm) and a maximum line diameter of 1/4 in (16mm), and can withstand a 200-pound (91kg) working load. Use them in a variety of control line applications and on small dinghies.
More Information >

List Price $29.65

APS Price $25.99

9 H471 Harken Micro Carbo Cam Cleat II
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Harken Micro Carbo Cam Cleat II H471

This Harken® Micro Carbo-Cam Cleat uses ball bearings to ensure that lines are held securely and release instantly for smooth, precise trimming every time.

Made with lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical, or where adjustments are less frequent.

More Information >

List Price $26.10

APS Price $22.99

10 LP91304 Laser Grab Rail Plug (10 pack)
Quick View > View Less > Stock Status: In Stock
Laser Grab Rail Plug (10 pack) LP91304

Always use new Grab Rail Anchor Plugs when mounting or remounting your Grab Rail.

These plastic captive nuts make replacing your Laser's grab rail a breeze so you can get back on the water faster.

One package of 10 screws is sufficient to replace two rails.

More Information >

APS Price $4.60

11 LP91307 Laser Grab Rail, Gray
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Laser Grab Rail, Gray LP91307

This gray Laser Grab Rail fits into the cockpit of your Laser Hull. Made of plastic, it provides a convenient lip to grab onto when climbing into the boat, or simply moving about.

Always use new Anchor Plugs when mounting or remounting your Grab Rail. One package of 10 screws is sufficient to replace two rails (sold separately).

More Information >

APS Price $24.47

11 NAT9966 Nautos Recreational Laser Grab Rail
Quick View > View Less > Stock Status: In Stock
9966-laser-training-grab-rail-1.jpg

This gray Laser Grab Rail fits into the cockpit of your Laser Hull. Made of plastic, it provides a convenient lip to grab onto when climbing into the boat, or simply moving about.

Always use new Anchor Plugs when mounting or remounting your Grab Rail. One package of 10 screws is sufficient to replace two rails (sold separately).

Use two on the cockpit

Use as a direct replacement for LP91308 Laser Grab Rail, Gray.

More Information >

APS Price $35.25

12 EX2000 Laser® Padded Hiking Strap
Quick View > View Less > Stock Status: In Stock
Laser Padded Hiking Strap EX2000

For comfortable hiking on your Laser, try out these Padding Hiking Straps from WinDesign. Made from two inch webbing and partly covered with nylon cloth to house the premium closed cell foam.

They will not absorb water, and feature standard Laser attachment points at the ends.

More Information >

APS Price $36.60

12 HC8396 Harken Hiking Strap - Laser
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Hiking Strap - Laser HC8396

Laser Hiking Straps by Harken Canvas are made with high-strength, nonabsorbent 1/2 in. tubular foam. They are covered with Aqualon Fabric and have a 3 in. webbing loop on one end for your bungee and purchase.

The Aqualon Fabric that covers the hiking strap is extremely strong, lightweight, and flexible 100% polyester fabric. It is highly resistant to mildew and its color will not rub off. Aqualon's superior dimensional stability withstands sagging, stretching, and shrinking to maintain its original fit.

More Information >

APS Price $35.00

12 LP91138 Laser Padded Hiking Strap
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders

This high performance hiking strap from Laser is padded on the underside only - its weight helps keep the strap flipped right side up.

The entire length of the edge is also padded for a more comfortable feel and the materials used hold up well in the sun. Even if you have a hiking strap, it's worth upgrading to this padded, positionally weighted, hiking strap.

More Information >

APS Price $10.00

12 ZHS201LASER Laser® Hiking Strap with ZhikGrip II
Quick View > View Less > Stock Status: In Stock

Originally designed for Olympic class sailors, the ZhikGrip II is made to combine and connect perfectly with all Zhik boots. It has a massive grip thanks to its locking system and has added durability that keeps you hiking at your best.

This combination of boot, ankle and hiking strap helps to relax the foot muscles so you can hike harder and longer, while being better connected to the dynamics of the boat. Boots are available in five styles depending on your preference and needs. Visit our Dinghy Boots Sectionfor all of Zhik boot options!

Info:

  • Size: 32 in x 3.35 in
  • Ends: 1 loop, 1 straight
More Information >

APS Price $79.00

12 RSTLPTPROBK Laser Pro Padded Hiking Strap- Rooster
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Laser Pro Padded Hiking Strap- Rooster RSTLPTPROBK

This padded Rooster Sailing Pro Hiking Strap features a SureGrip textured rubber compound on the underside of the strap that enables you to hike out using even the bitter end of your toes without loosing grip.

Developed with top international races to have just the right amount of padding; enough to keep you comfortable and maintain maximum feel at the same time.

More Information >

APS Price $46.95

12 NAT9744 Nautos Recreational Laser Padded Hiking Strap
Quick View > View Less > Stock Status: In Stock
9744-toe-strap-for-laser-and-laser-2-k-1.jpg

This high performance hiking strap from Laser is padded on the underside only - its weight helps keep the strap flipped right side up.

The entire length of the edge is also padded for a more comfortable feel and the materials used hold up well in the sun. Even if you have a hiking strap, it's worth upgrading to this padded, positionally weighted, hiking strap.

Similar to LP91138 Laser Padded Hiking Strap.

More Information >

APS Price $31.02

13 LP91049 Laser Bow Eye
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Laser Bow Eye LP91049

Made especially for the Laser, this plastic bow eye gives an attachment point for a bowline as well as the daggerboard shockcord. Accepts two #10-24 x 1-1/4 in screws.

More Information >

APS Price $6.12

13 HA134BL Bow Eye - Blue
Quick View > View Less > Stock Status: In Stock

Holt Allen's Bow Eye is made of gray-black Acetal resin and can be used either as a fairlead, or as a bow eye fitting (as found on a Laser).

More Information >

APS Price $11.78

13 NAT0134 Nautos Recreational Laser Bow Eye, gray
Quick View > View Less > Stock Status: In Stock
0134-deck-bow-eye-grey-1.jpg

Made especially for the Laser, this plastic bow eye gives an attachment point for a bowline as well as the daggerboard shockcord. Accepts two #10-24 x 1-1/4 in screws.

Use as a direct replacement for LP1049 Laser Bow Eye.

More Information >

APS Price $6.11

Please wait...