Laser Rudder, Rudder Fittings and Parts Diagram

To view the description for an individual product in this group, please click on the "Quick View" option below.

Laser-Rudder-and-fittings-Diagram

Availability: In stock

NO Item NO Product Name Price Qty
1 H710048 Harken Aluminum Tiller Extension 48"
Quick View > View Less > Stock Status: In Stock

Harken's Tiller Extension is simple. This no frills, lightweight aluminum stick is built for strength, stiffness, and comfort.

The flexible rubber universal joint and nonslip foam grip are UV-protected. This extension is easily detached by slipping off the plastic cover over the tiller fastening plate.

More Information >

List Price $69.95

APS Price $61.99

1 LP85195 Tiller Extension Pro - 48
Quick View > View Less > Stock Status: In Stock
Tiller Extension Pro - 48 LP85195

Laser Performance offers a line of tiller extensions that have a simple and lightweight aluminum design. They may have no unnecessary frills but every aspect contributes to its strength, stiffness, and comfort.

The universal joint and nonslip foam grip are UV-protected and offer exceptional grip and maneuverability. Extensions are available in multiple lengths to suite boat types or personal preferences.

All extensions include a universal joint and base for mounting to your existing tiller saddle. Only two small screws needed to install.

More Information >

APS Price $46.00

1 SBW310424 Raptor Laser Carbon Tiller Extension - 48 inch
Quick View > View Less > Stock Status: In Stock
Raptor Laser Carbon Tiller Extension - 48 inch SBW310424

This Raptor Laser Carbon Tiller Extension is an excellent choice for any sailor looking to upgrade. Very similar to the Fatso Jr., but is round in cross section, rather than oval, giving a symmetric feel anywhere on the shaft.

It is coated with carbon and epoxy non-skid along it's length for excellent grip and hand feel. 

Approximately 1" in diameter and 48" long.

More Information >

APS Price $126.50

3 H7102 Harken Replacement Universal for Tiller Extension
Quick View > View Less > Stock Status: In Stock

Harken applies the same standards to its flexible rubber universal joint as it does to its blocks, shackles, winches, hydraulics, travelers, and other hardware yet it doesn't boast about them.

Harken's replacement Universal joint for tiller extensions is made of flexible black rubber that swivels 360ᄚ and enables the helmsperson to have good feel and a responsive helm.

More Information >

List Price $11.90

APS Price $10.99

3 R0840 RWO Universal 5/8 Black Rubber
Quick View > View Less > Stock Status: In Stock

The Omniflex black rubber universal fits 5/8 in. tubes. Easily removed for tiller mount.

Molded from high quality, elastomeric polymer.

Completely omni-directional in operation and capable of millions of flexes without failure.

Use a sleeve (R0846) to fit this and other 5/8 in. universals to a 3/4 in. tube.

More Information >

APS Price $10.50

4 EX652910 Optiparts Laser Tiller with 39.4" Extension
Quick View > View Less > Stock Status: In Stock
Optiparts Laser Tiller with 39.4" Extension EX652910

A nice robust combination of a Laser Tiller and Extension by Optiparts.

The 32mm tiller outer end has a molded anodized aluminum insert and the inner end is sealed with a plastic cap. It is black anodized with a stainless steel anti chafe protecting plate for the traveler line. Has an aluminum clam cleat mounted on the side of the tube.

The aluminum tiller Extension has a foam grip and an Optiparts rope core universal.

More Information >

APS Price $162.70

4 LP85201 Gorilla Tiller with 42" Tiller Extension
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Gorilla Tiller with 42" Tiller Extension LP85201

This Laser Performance Gorilla Tiller comes with 42 inch Tiller extension with foam handle. The tiller and extension set features a universal joint, metal chafe plate, tiller saddle and clam cleat.

More Information >

APS Price $169.00

5 EX652850 Optiparts Carbon Laser Tiller, New Style
Quick View > View Less > Stock Status: In Stock
Optiparts Carbon Laser Tiller, New Style EX652850

Optiparts Carbon Laser Tiller has a high gloss finish and an ultra low profile design that minimizes traveler line/block interference. Traveler line does not touch when sailing upwind. Weighs less than 300 grams.

Aluminum clam cleat for rudder downhaul line (This is the only difference we can find between the Optiparts Tiller and the Laser Carbon tiller); stainless steel anti-chafe plate protects the tiller when traveler block hits during a tack. Predrilled for RWO, Jamaica and Acme extensions.

Please Note: The hole spacing does not match the Forespar Giant Stick, they require flat head screws to install properly.

More Information >

APS Price $213.55

5 EX652900 Optiparts Laser Tiller - with Cleat and Plate
Quick View > View Less > Stock Status: In Stock
Optiparts Laser Tiller - with Cleat and Plate EX652900

This super tough Optiparts Laser Tiller with cleat and plate is made with black 1-1/4 inch aluminum. Cast aluminum rudder head insert fits snug and does not wear out.

Comes with aluminum downhaul cleat and stainless steel wear plate. It is pre-drilled with one hole to be used as a guide for many popular extensions.

More Information >

APS Price $107.00

5 LP85002 Laser XD Carbon Tiller
Quick View > View Less > Stock Status: In Stock
Laser XD Carbon Tiller LP85002

This Laser Performance, XD series (XD = upgrade!) Tiller is made of carbon fiber with a matte finish.

The carbon construction and U-shaped design allows it to be super-stiff and strong yet lightweight.

Comes with a Clamcleat V-Cleat for the rudder downhaul and a stainless steel chafe plate for the traveler.

More Information >

APS Price $328.95

5 RST006 Rooster Carbon Laser Tiller
Quick View > View Less > Stock Status: In Stock
Rooster Carbon Laser Tiller RST006

The strongest tiller on the market, the Rooster Carbon Tiller is manufactured on a mandrill with pre-preg materials to produce the most consolidated carbon fibers ever. Each tiller is additionally wound with 45 degree twill to improve strength, making it crush resistant.

Fitted with a stainless steel plate to prevent traveler wear and a cleat for easy handling of rudder downhaul.

More Information >

APS Price $275.00

5 SBW310423 Raptor Laser® Carbon Tiller
Quick View > View Less > Stock Status: In Stock
Raptor Laser Carbon Tiller SBW310423

This carbon tiller is an excellent choice for any sailor looking to upgrade. This Raptor Laser Carbon Tiller is very similar to the popular Black Diamond  tiller except that this is lighter and stronger.

The sturdy carbon construction allows for smooth steering and tiller response while maintaining a low-profile design. Tiller includes a wear plate and a metal clam cleat which holds the rudder line much more securely than its plastic counterpart.

It's created in a single mold, as a single piece which reduces both weight and the chance of failure.

More Information >

APS Price $236.50

6 HA27874 GRAY 38mm Single (Upper (Large) Traveler Block)
Quick View > View Less > Stock Status: In Stock
38mm Single (Upper (Large) Traveler Block) HA27874   GRAY

Holt Allen Plain Bearing Blocks are Nylon composite and can be used in a number of applications. They have been adopted by the Laser class as the block of choice for use on the mainsheet system.

Its axle is made of 316 stainless steel, and the cheeks are filled Nylon with stainless steel straps.

More Information >

APS Price $24.32

6 LP91043 Laser Upper (Large) Traveler Block, Blue
Quick View > View Less > Stock Status: In Stock
Laser Upper (Large) Traveler Block, Blue LP91043

Laser Performance Plain Bearing Block is designed for use as the upper half of the two part traveler assembly, which the mainsheet is routed through.

Made of a Nylon composite material with grade 316 stainless steel axle and reinforcing straps.

For a complete unit also purchase the Lower Traveler Block, and a 1” piece of heat shrink tubing to secure the sister clips.

More Information >

APS Price $24.00

6 NAT91125 Nautos Recreational Laser Upper (Large) Traveler Block
Quick View > View Less > Stock Status: In Stock

The Laser Upper (Large) Traveler Block in Gray is designed for use as the upper half of the two part traveler assembly, which the mainsheet is routed through.

Made of a Nylon composite material with grade 316 stainless steel axle and reinforcing straps.

For a complete unit also purchase the Lower Traveler Block, and a 1” piece of heat shrink tubing to secure the sister clips.

Key Features:

  • Working Load 190 lbs
  • Max Line 3/8" - 10mm
  • Sheave 40 mm ball bearing
More Information >

APS Price $11.78

6 NAT91125R Nautos Training Laser Upper(Large) Traveler Block w/BB Shev.
Quick View > View Less > Stock Status: In Stock
91125r-plastic-block-40mm-ball-bearing-sheave-with-sister-clip-black-1.jpg

The Laser Upper (Large) Traveler Block in Gray with a ball bearing sheave for lower frictions is designed for use as the upper half of the two part traveler assembly, which the mainsheet is routed through.

Made of a Nylon composite material and grade 316 stainless steel.

For a complete unit also purchase the Lower Traveler Block, and a 1” piece of heat shrink tubing to secure the sister clips.

Similar to LP91043 Laser Upper (Large) Traveler Block, Blue.

Key Features:

  • Working Load 190 lbs
  • Max Line 3/8" - 10mm
  • Sheave 40 mm ball bearing
More Information >

APS Price $19.22

7 HA17874 GRAY Laser Lower Traveler Block (29mm single)
Quick View > View Less > Stock Status: In Stock
Laser Lower Traveler Block (29mm single) HA17874   GRAY

Allen Brothers Plain Bearing Blocks are made of Nylon composite and can be used in any number of applications. They have been adopted by the Laser class as the block of choice for use on the mainsheet traveler systems.

This Lower Block is for the traveler side of the mainsheet/traveler setup, for a complete unit also purchase the Upper Traveler Block and a piece of 1” heat shrink to secure them.

It’s axle is made of 316 stainless steel, and the cheeks feature stainless steel reinforcing straps.

More Information >

APS Price $16.26

7 LP91245 Laser Lower (Small) Traveler Block, Blue
Quick View > View Less > Stock Status: In Stock
Laser Lower (Small) Traveler Block, Blue LP91245

Laser Performance Plain Bearing Block is designed for use as the Lower half of the two part traveler assembly, which travels along the traveler line.

Made of a Nylon composite material with grade 316 stainless steel axle and reinforcing straps.

For a complete unit also purchase the Upper Traveler Block, and a 1” piece of heat shrink tubing to secure the sister clips.

More Information >

APS Price $17.00

7 NAT91124 Nautos Recreational Laser Lower (Small) Traveler Block
Quick View > View Less > Stock Status: In Stock
91124-plastic-block-28mm.jpg

Laser Lower (Small) Traveler Block, Gray is designed for use as the Lower half of the two part traveler assembly, which travels along the traveler line.

Made of a Nylon composite material with grade 316 stainless steel axle and reinforcing straps.

For a complete unit also purchase the Upper Traveler Block, and a 1” piece of heat shrink tubing to secure the sister clips.

Key Features:

  • Working Load 120 lbs
  • Max Line 5/16" - 8mm
  • 28mm sheave diameter

Use as a direct replacement for LP91245.

More Information >

APS Price $11.06

8 LP91451 Harken Laser Traveler Block
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Harken Laser Traveler Block LP91451

A great Harken upgrade from Laser Performance, this upper Traveler Block features ball bearings for low friction sheeting and fast mainsheeet eases around the top mark.

The block is also constructed as a one piece unit with a hinge connecting both halves. This means no more fussing around with Brummel (sister) hooks and shrink wrap!

More Information >

APS Price $68.85

8 NAT9112425 Nautos Recreational Laser Traveler Block Set
Quick View > View Less > Stock Status: In Stock
91124-25-main-traveller-blocks-sister-clips-fast-joint-set-of-2-1.jpg

The composite Upper Traveler Block Set offers low friction sheeting and fast mainsheeet eases around the top mark.

The brummel(sister) hooks are designed to connect the two adjoining blocks forming one upper traveler block configuration

Purchase a 1 inch piece of heat shrink tubing to secure the sister clips.

Key Features:

  • Easy on off with sister clips
  • Set of blocks/91124 and 91125
  • No ball bearings
  • Nautos 5 year warranty

Similar to LP91451 Harken Laser Traveler Block

.
More Information >

APS Price $24.30

8 NAT91619 Nautos Training Laser Traveler Blocks Linked w/Kevlar Rope
Quick View > View Less > Stock Status: In Stock
91619-attached-blocks-91124-91125-kevlar-rope-1.jpg

The composite Laser Traveler Blocks, are linked with Kevlar Rope for added added security of your sheet and travelers purchase system. It offers low friction sheeting and fast mainsheeet eases around the top mark.

The two blocks are joined by extremely strong kevlar rope to form one upper traveler block configuration with a much longer lifespan

Similar to LP91451 Harken Laser Traveler Block

.
More Information >

APS Price $24.14

8 NAT91619R Nautos Training Laser Traveler Blocks Kevlar Link, BB Sheave
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
91619r-linked-blocks-ball-bearings-kevlar-linked-1.jpg

The composite Laser Traveler Blocks, are linked with Kevlar Rope for added added security of your sheet and travelers purchase system. This model offers bearing balls for lower friction sheeting and faster mainsheeet easing around the top mark.

The two blocks are joined by extremely strong kevlar rope to form one upper traveler block configuration with a much longer lifespan

Similar to LP91451 Harken Laser Traveler Block

.
More Information >

APS Price $28.95

9 HA282 Bridge Fairlead - Black/Gray ID 9mm (2)
Quick View > View Less > Stock Status: In Stock
Holt Allen's Bridge Fairlead is made out of hard-wearing, black/gray, Acetal resin and has rounded edges to minimize friction and line abrasion. It measures 1 1/16 in. high x 1 5/8 in. long x 9/16 in. wide (27mm x 42mm x 14mm). It has a 3/8 in. (9.5mm) aperture.
More Information >

APS Price $6.50

9 LP91308 Laser Boom and Traveler Fairlead - Blue
Quick View > View Less > Stock Status: In Stock
Laser Boom and Traveler Fairlead - Blue LP91308

This Laser Performance plastic fairlead has two common uses on your Laser. It can function on the boom as the outhaul fairlead, or can be attached to the deck as a traveler fairlead.

Fairlead has 23mm hole spacing, which will fit Laser hulls newer than 2004.

More Information >

APS Price $5.00

9 LP91321 Laser Aluminum Traveler Fairlead
Quick View > View Less > Stock Status: In Stock
Laser Aluminum Traveler Fairlead LP91321

Many older model Lasers feature these Aluminum Fairleads for their traveler attachment points. The new standard for fairleads is a molded plastic material, but if it’s time to replace them the Aluminum version shown here is a great upgrade.

This Aluminum version has 23mm hole spacing, which will work on all Laser hulls built after 2004. Prior to 2004 the hole spacing was 26mm.

More Information >

APS Price $12.00

9 NAT91107 Nautos Recreational Laser Traveler Fairlead
Quick View > View Less > Stock Status: In Stock
NAT91107-Plastic-Nautos-Fairlead

This Laser Performance plastic fairlead has two common uses on your Laser. It can function on the boom as the outhaul fairlead, or can be attached to the deck as a traveler fairlead.

Fairlead has 23mm hole spacing, which will fit Laser hulls newer than 2004.

Key Features:

  • Bore 7/16"
  • Center to center mounting holes 31/32"
  • Height 43/64"
  • Length 1 5/8"
  • Width 9/16"

Use as a direct replacement for LP91308 Laser Boon and Traveler Fairlead, Blue.

More Information >

APS Price $2.15

10 LP91309 Screw Cap for Trav. Fairleads(pr)
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Screw Cap for Trav. Fairleads(pr) LP91309

Use these Laser Performance screw caps in conjunction with your traveler fairleads. The caps protect the sharp end of the self-tapping screws. Sold in a pair.

More Information >

APS Price $7.00

12 LP85251 Laser Rudder Jam Cleat (1)
Quick View > View Less > Stock Status: In Stock
Laser Rudder Jam Cleat LP85251

What you see here, ladies and gentlemen, is a plastic Laser Rudder Jam Cleat that attaches to any standard aluminum Laser tiller.

The cleat provides a tie off point for the rudder downhaul line, which also keeps the rudder down and the tiller in place all at the same time. This cleat can come in handy for many other uses as well, such as flag halyards or organizing lines in the sail locker.

More Information >

APS Price $4.00

12 HA124 Jam Cleat - Nylon (2) 6mm Max Line
Quick View > View Less > Stock Status: In Stock

This Holt Allen nylon jam cleat works great for flag halyards, or organizing lines in the sail locker as well as many other uses.

Sold in pairs.

More Information >

APS Price $3.03

14 EX2051 Optiparts Laser Gudgeon: Recreational
Quick View > View Less > Stock Status: In Stock
Optiparts Laser Gudgeon: Recreational EX2051

This Optiparts Laser Gudgeon is meant for recreational use only. Gudeons are the female piece on the transom of your laser used for attachment of the rudderhead.

This Gudgeon is NOT class legal. Sold individually.

More Information >

APS Price $7.30

14 LP85051 Laser Gudgeon - Black
Quick View > View Less > Stock Status: In Stock
Laser Gudgeon - Black LP85051

Black plastic Laser Gudgeon by Laser Performance. This is a direct replacement for stock Laser sailboats.

Gudgeons are the female piece on the transom of your laser used for attachment of the rudderhead.

More Information >

APS Price $11.00

14 NAT91120 Nautos Recreational Laser Gudgeon - Black
Quick View > View Less > Stock Status: In Stock
91120-nylon-transom-gudgeon-4-mounting-holes-laser-set-of-2-pieces-1.jpg

Black plastic Laser Gudgeon by Laser Performance. This is a direct replacement for stock Laser sailboats.

Gudgeons are the female piece on the transom of your laser used for attachment of the rudderhead.

Use as a direct replacement for LP85051 Laser Gudgeon - Black

More Information >

APS Price $5.95

15 LP85238 Rudder Lift Stop
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Rudder Lift Stop LP85238

This Rudder Lift Stop is a stainless steel tab that attaches to the transom to keep the rudder from popping out while sailing or capsizing.

A Retaining Clip is also referred to as a Rudder Lift Stop. Suitable for use on C420, Laser, V15 and FJ.

More Information >

APS Price $10.00

15 NAT9956 Nautos Recreational Laser Rudder Lift Stop
Quick View > View Less > Stock Status: In Stock
9956-rudder-retaining-clip-1.jpg

This Rudder Lift Stop is a stainless steel tab that attaches to the transom to keep the rudder from popping out while sailing or capsizing.

A Retaining Clip is also referred to as a Rudder Lift Stop. Suitable for use on C420, Laser, V15 and FJ.

Use as a direct replacement for LP85238 Laser Rudder Lift Stop.

More Information >

APS Price $4.42

17 EX2053 Optiparts Recreational Laser Rudderhead
Quick View > View Less > Stock Status: In Stock
Optiparts Recreational Laser Rudderhead EX2053

Optiparts Recreational Laser Rudderhead is a great option for training use or just-for-fun-sailing.

Although not legal for racing use, the Rudder Head will fit with any tiller and hardware that is class legal.

  • Made of stainless steel and silver anodized aluminum.
  • NOT class legal
More Information >

APS Price $101.35

17 LP85135 Laser Rudderhead with Pintles
Quick View > View Less > Stock Status: In Stock
Laser Rudderhead with Pintles LP85135

Complete Laser Rudder Head with pintles. Fits all Laser model years.

More Information >

APS Price $185.00

17 NAT91113D Nautos Recreational Laser Rudder Head with Pintles
Quick View > View Less > Stock Status: In Stock
91113D-Laser-Rudder-head-with-pintles.jpg

Complete Laser Rudder Head with pintles. Fits all Laser model years.

Use as a direct replacement for LP85135 Laser Rudderhead with Pintles.

More Information >

APS Price $126.90

18 LP85078 Laser Rudder Pivot Pin - 3/8" Heavy Duty
Quick View > View Less > Stock Status: In Stock
Laser Rudder Pivot Pin - 3/8" Heavy Duty LP85078

For a heavy duty upgrade to the standard Laser Rudder Pivot Pin, Laser Performance offers this 3/8 in thick, stainless steel Pivot Pin for added durability. Includes one bolt, two 20mm washers and a Nyloc nut.

Rudder Pivot Pins are used to connect the rudder head to the rudder blade, allowing the rudder to pivot up and down.

More Information >

APS Price $8.00

19 LP85241 Laser Retaining Pin
Quick View > View Less > Stock Status: In Stock
Laser Retaining Pin and Line LP85241

Laser sailing is rarely effectively when the tiller slips out of the rudderhead. This Retaining Pin is an added layer of security to help keep things securely in place when inserted into the small hole that aligns with the tiller wedge and rudder head.

More Information >

APS Price $3.85

20 EX2054 Optiparts Recreational Laser Rudder Blade
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
Optiparts Recreational Laser Rudder Blade EX2054

This Optiparts Recreational Laser Rudder Blade is a great option for training use or just-for-fun-sailing.

Although not legal for racing use, this Rudder Blade will fit with any tiller and hardware that is class legal.

  • Made of a wood core with fiberglass laminate and white gelcoat.
  • Sold as blade only
  • NOT class legal
More Information >

APS Price $213.15

20 LP85118 Laser GRP Rudder - Blade Only
Quick View > View Less > Stock Status: In Stock
Laser GRP Rudder - Blade Only LP85118

Laser GRP Rudder Blade by Laser Performance.

With the most sophisticated composite manufacturing process available, Laser Performance brings you the Laser GRP Rudder that offers increased performance and durability over the previous versions.

GRP blades are composed of structural fiberglass skins with a polyurethane high density closed cell foam cores. What does that mean for you? It means a smooth sleek finish, and a longer lasting product that won't warp in the heat or easily acquire shark attack like markings on the tailing edges or tips.

GRP Laser foils are class legal. These rudders are significantly more durable than previous generations but since their not made of solid Carbyne, care and repair instructions are included.

Rudder Blade for Lasers. Sold as blade only with no additional hardware. Compatible with all Laser model years.

More Information >

APS Price $299.00

20 NAT9889 Nautos Recreational Laser GRP Rudder Only(no rudder head)
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
9889-laser-training-rudder-blade-1.jpg

Nautos Recreational Laser GRP Rudder Blade

With one of the most sophisticated composite manufacturing processess available, Nautos brings you a Laser Rudder that offers increased performance and durability over the previous versions.

These blades are composed of structural fiberglass skins with a polyurethane high density closed cell foam core. What does that mean for you? It means a smooth sleek finish, and a longer lasting product that won't warp in the heat or easily acquire shark attack like markings on the tailing edges or tips.

Laser foils are class legal. These rudders are significantly more durable than previous generations but since their not made of solid Carbyne, care and repair instructions are included.

Rudder Blade for Lasers. Sold as blade only with no additional hardware. Compatible with all Laser model years.

More Information >

APS Price $244.40

21 NAT91127 Nautos Training Laser Rudder Head Screw w/ Plastic Bushing
Quick View > View Less > Stock Status: In Stock
91127-screws-for-rudder-head-1.jpg

For a Laser Rudder Head Pin, Nautos offers this Rudder Head Screw with plastic bushing for added durability.

Rudder Pivot Screws are used to connect the rudder head to the rudder blade, allowing the rudder to pivot up and down.

More Information >

APS Price $10.14

22 LP85153 Laser GRP Rudder Complete
Quick View > View Less > Stock Status: In Stock
Laser GRP Rudder Complete LP85153

Complete Laser Rudder, rigged and ready to be dropped into place. Includes rudderhead with pintles on a GRP Fiberglass Rudder Blade.

With the most sophisticated composite manufacturing process available, Laser Performance brings you the Laser GRP Daggerboard that offers increased performance and durability over the previous versions.

GRP blades are composed of structural fiberglass skins with a polyurethane high-density closed cell foam cores. What does that mean for you? It means a smooth sleek finish, and a longer lasting product that won't warp in the heat or easily acquire shark attack like markings on the tailing edges or tips.

GRP Laser foils are class legal. Daggerboard stopper included. These daggerboards are significantly more durable than previous generations but since their not made of solid Carbyne, care and repair instructions are included.

More Information >

APS Price $475.00

22 NAT988913 Nautos Recreational Laser GRP Rudder Complete
Quick View > View Less > Stock Status: Out of Stock and Accepting Orders
9889-13-complete-laser-training-rudder-blade-1_grande.jpg

Complete Laser GRP Rudder, rigged and ready to be dropped into place. Includes rudderhead with pintles on a Fiberglass Rudder Blade.

With the most sophisticated composite manufacturing process available, Laser Performance brings you the Laser GRP Daggerboard that offers increased performance and durability over the previous versions.

GRP blades are composed of structural fiberglass skins with a polyurethane high-density closed cell foam cores. What does that mean for you? It means a smooth sleek finish, and a longer lasting product that won't warp in the heat or easily acquire shark attack like markings on the tailing edges or tips.

Laser foils are class legal. Daggerboard stopper included. These daggerboards are significantly more durable than previous generations but since their not made of solid Carbyne, care and repair instructions are included.

Use as a direct replacement for LP85135 Laser GRP Rudder Complete.

More Information >

APS Price $293.28

23 HA423 Allen Brothers Drain Plug COMPLETE Assembly
Quick View > View Less > Stock Status: In Stock
Allen Brothers Drain Plug COMPLETE  Assembly HA423

New from Holt Allen, this black bung will fit both a standard (RWO) socket and it's own as well. It seals with a rubber O-ring and has a loop end!

More Information >

APS Price $5.72

23 HA424 Replacement Bung Only for HA423
Quick View > View Less > Stock Status: In Stock
Replacement Bung Only for HA423 HA424

Replacement Bung for Allen Brothers Drain Plug Assembly (HA423)

More Information >

APS Price $4.20

24 R2064 RWO 1/4 Turn Drain Plug, BUNG ONLY
Quick View > View Less > Stock Status: In Stock
RWO 1/4 Turn Drain Plug, BUNG ONLY R2064

White Plastic. 7/8 in inch mounting hole. The older style. Bungs twist 1/4 turn to close. The bungs are fitted with a retainer to help prevent loss. Sold as a complete assembly, R2060, or just a replacement bung.

More Information >

APS Price $3.48

25 R2066 RWO Screw-In Drain Plug, Complete Assy.
Quick View > View Less > Stock Status: In Stock
RWO Screw-In Drain Plug, Complete Assy. R2066

Our most popular drain plug by far. Black Plastic. Same size hole (7/8 inch) as the older white quarter-turn type assembly, but with a better O-ring rubber seal.

The RWO screw-in bungs are also fitted with a retainer to help prevent loss. Sold as a complete assembly or just a replacement bung (R2067).

More Information >

APS Price $5.48

26 HA323 Holt Allen Drain Plug, COMPLETE Assy.
Quick View > View Less > Stock Status: In Stock
Holt Allen Drain Plug, COMPLETE Assy. HA323

Gray. Screw-in hole spacing matches the RWO bung - Assembly mounting hole is slightly larger than the RWO (should fit without enlarging existing hole). Bung is captive. Seals with rubber O-ring. Sold as an assembly only (replacement bungs are not available separately).

More Information >

APS Price $5.48

Please wait...