Made of 1/8 in 1x19 wire with a marine eye that is pre-bent to the proper entry angle to the mast and then tapped and threaded to accept your 1/4 in, 20 bolt. The deck end has a Lightning single barrel adjuster with a calibrated Handy Lock (1/4 in. pin).
To produce a new shroud, we would ask you to provide us the length of your existing rigging at normal sailing setting (medium air) from bearing surface to bearing surface.
This can be done in two ways:
- You can ship us your existing shroud for our rigging department to duplicate.
- You can measure your own rigging and we will work from the measurements that you provide us.
Please visit our page on How To Measure Standing Rigging before placing your order.
Feel free to give our Customer Service guys a call with any questions at 800.729.9767.