We offer Melges 24 shrouds in 3/16 in 1x19 wire with T-ball fittings on the mast end and allow you to use Open Body Turnbuckles.
Not sold as a pair ﾖ 1 shroud only.
To produce a new pair of upper or lower shrouds, we would ask you to provide us the length of your existing shrouds at their normal sailing setting (medium air) from bearing surface of the T-ball to the bearing surface of the toggle plate at the bottom of the turnbuckle.
This can be done in two ways:
- You can ship us your existing shrouds for our rigging department to duplicate.
- You can measure your own rigging and we will work from the measurements that you provide us.
Please visit our page on How To Measure Standing Rigging before placing your order.
Note: If you have an older Melges 24 and your spreaders are captive on the shrouds then you will have to ship us your spreaders and shrouds for duplication. Please contact us at 1(800)729-9767 to speak with our Customer Service Crew; they'll be happy to set you up.