Spinlock makes a vertically pivoting PXR Cam Cleat and codes it with a VP for vertical pivot. It has a pivoting sheave and can be mounted at the mast base for catamaran downhauls and vangs, on a center console or dashboard for feeding control lines out to the sides, or under the boom for outhaul and vang controls. It can be taken off easily. It accepts Harken H415 sheave. Not only does this cam compact roller action ensure quick and easy release under high loads, it resists accidental cleating and works especially well with high-performance lines. Spinlock anodized aluminum PXR Cam Cleat has a three-stage release control switch that enables the trimmer to select the release setting depending on the prevailing conditions and the task at hand. The light setting might be appropriate for continuously trimmed sheets, traveler controls, and vangs whereas higher setting might be better for halyards and occasionally adjusted lines. The SPPXR0206VP works with 3/32 in (2mm) to ﾼ (6mm) line although we do not recommend it for 3/32 in (2mm) line and only for 1/8 in (3mm) line with looser covers, because more tightly covered lines and 12-strand line will slip.