KEEP THE MAST UP AND THE WATER OUT.
This Spartite Mast Wedge Replacement System for small to medium sized boats is the perfect solution to securing and sealing the mast at deck level. This Spartite 2000 Small Kit #1 covers 51 cu-inches and is designed for sailboats under 40' feet in overall length (as a general guide). Each kit comes with complete instructions and materials for the yard or yacht owner to build a simple mold out of even the most complex partners or mast collar. Spartite makes a one piece perfect fitting mast chock that replaces archaic wedges. To estimate the quantity of SPARTITE needed, measure the square area of the mast section and subtract that number from the square inch, or square centimeter, area of the partner opening. Multiply this number by the desired depth, which must be at least 2 in. (5 cm), then add 1/4 in. (7 mm). If you purchase too little, a further amount can always be mixed and added later. Smaller Kit I fills 51 cu in (836 cu cm).
- Included: Pre-measured Spartite cans
- Modeling clay
- Foam support strips
- Stirring sticks
- Plastic gloves
- Petroleum Jelly
- Complete Instructions