Swaged Wire Standing Rigging Services


Capabilities
Our rigging department is capable of producing any standing rigging solution with 1x19 or Dyform stainless steel wire.  

Swaging
Swaging is by definition "cold roll forging".  This process forces the strands of wire and the terminal together under great pressure, causing a bond that cannot be separated even if the wire is pulled in excess of its breaking strength.  We use a precision mechanical swaging machine to reduce work hardening of the fittings making our swages safer, straighter, stronger and longer lasting.

Measurements
For exact measurements, we recommend sending us your existing rigging for us to measure.  If that is not possible, we can work from you measurements.  If you will be providing us measurements, be sure to refer to our How to Measure Wire Rigging instructions before attempting to take any measurements.  Don't forget to print out  our Wire Rigging Worksheet to record your information on.

How to Order Rigging 
Click here for information on how to order rigging 


Rigging Services

 

 rigging turnbuckle swaged to wire

Swage

Turnbuckle swaged to 1 x 19 stainless steel wire.

Rigging Charge: $8.00 per 1/16" - 5/32" swage
Rigging Charge: $14.00 per 3/16"+ swage 

How to Order Rigging


 rigging t ball swaged to wire

Swage

T-Ball Terminal swaged to 1 x 19 stainless steel wire.

Rigging Charge: $8.00 per 1/16" - 5/32" swage
Rigging Charge: 
$14.00 per 3/16"+ swage 

How to Order Rigging


 rigging fork end swaged to wire

Swage 

Fork end swaged to 1 x 19 stainless steel wire.

Rigging Charge: $8.00 per 1/16" - 5/32" swage
Rigging Charge: 
$14.00 per 3/16"+ swage 

How to Order Rigging


 rigging marine eye swaged to wire

Swage 

Marine eye swaged to 1 x 19 stainless steel wire.  Reminder - Marine eyes have Larger clevis pin holes than aircraft eyes.

Rigging Charge: $8.00 per 1/16" - 5/32" swage
Rigging Charge: 
$14.00 per 3/16"+ swage 

How to Order Rigging


 rigging aircraft eye swaged to wire

Swage 

Aircraft eye swaged to 1 x 19 stainless steel wire.  Reminder - Aircraft eyes have smaller clevis pin holes than marine eyes.

Rigging Charge: $8.00 per 1/16" - 5/32" swage
Rigging Charge: 
$14.00 per 3/16"+ swage 

How to Order Rigging


Please wait...