Dynamic Dollies Gig Harbor 9.5 / 10 Dolly
The Gig Harbor 9.5 / 10 > dolly by Dynamic Dollies makes launching, recovering transporting and storing rowboats, jon boats and skiffs an easy one person job. The aft hull is suppported in the sling, while the bow end of the boat rests on a firm rubber ‘V-Fitting’. Simply roll the dolly into the water and float your boat on or off.
- Made with 1-1/2” structural grad anodized aluminum tubing with boat-friendly round corners
- All joint fittings are UV stable, through-bolted (Stainless fittings), and designed for torque stability
- Strong, UV Stable, non-stretch, 3” polyester sling supports the aft hull evenly
- Two adjustable, flexible V-fittings can be positioned to fit your boat’s keel. One on the tongue tube and another on the forward upright tube
- Eyelets on both sling fittings allow you to run a line across the top of your boat securing it to the dolly
- Eyelet on the front handle fitting allows you to tie the bow of your boat to the dolly
- Easy, no-tools dolly breakdown using the snap buttons on the wheel axle shafts and tongue tube, as well as wing nuts on axle tube cross fitting
- Pneumatic, non-corrosive, 16” x 4” wheels with Delrin roller bearings for easy maneuvering
- Large 18” x 9.5” pneumatic tire option available for use on rough terrain or soft sand
Dollies are designed to accommodate boats with their outboard motor mounted and gas tank on onboard.
|Boat Type||Gig Harbor 9.5 / 10|
|Dolly Type||Type 7|