Dry Suit Replacement Wrist Seal LG & XL (1)
|Neck Seal||Wrist/Cuff Seal||Ankle Seal||Flat Sock Seal||3D Sock Seal|
|Diameter (A)||Diameter (A)||Diameter (B)||Diameter (A)||Diameter (A)||Diameter (A)||Diameter (B)|
*Size Tolerance on all itmes: +/- 2.5%
Standard design Dry Suit Replacement Wrist Seal in four sizes to provide a secure fit. The rule of thumb is to match the seal size to the size of your dry suit.
Seals are made with 100% latex rubber. Home installation is accomplished using Aquaseal adhesive which dries in 24 hours. The addition of Cotol-240 speeds up full cure time of Aquaseal to 2 hours. Adhesives sold separately.
Installing all five seals will usually consume two tubes of Aquaseal.
This type of seal can be stretched if it is slightly too tight, but is not designed to be cut to achieve larger sizing – they are not tapered, nor do they have ‘trim lines’.
- Size: Large / Extra Large
- 100% latex rubber
- Sold individually
Refer to the illustration above when using these measurements. The diameter is measured with the suit opening perfectly round (not lying flat).
|Size||Dia. 'A'||Dia. 'B'|
|Recommended Use||Cold Weather|
|Material / Fabric||100% Latex|